cancel
Showing results for 
Search instead for 
Did you mean: 

BPE VPEX Downgrade

BPE VPEX Downgrade

Jose_Chaves
New Contributor II

Hi,

I was staging some v.300 (about 100) and I noticed the some come with a version newer (1.4.0.23) that  the one I need (1.4.0.21).

I have auto-upgrade active on the CB.

When the v.300 tries to upgrade it gives the following message:

 

09/27/2023 16:14:24.72 <Info:vlan.msgs.portLinkStateUp> Slot-1: Port 1:1 link UP at speed 1 Gbps and full-duplex

09/27/2023 16:14:26.22 <Info:vlan.msgs.portLinkStateDown> Slot-1: Port 1:1 link down

09/27/2023 16:14:28.64 <Info:vlan.msgs.portLinkStateUp> Slot-1: Port 1:1 link UP at speed 1 Gbps and full-duplex

09/27/2023 16:14:29.15 <Info:HAL.Card.Info> Slot-1: Module in Slot-100 is inserted

09/27/2023 16:14:29.17 <Noti:DM.Notice> Slot-1: Slot-100 being Powered ON

09/27/2023 16:14:29.18 <Info:HAL.Card.Info> Slot-1: VPEX BPE slot 100 Active image VER 1.4.0.23, recommended VER 1.4.0.21

09/27/2023 16:14:34.47 <Info:LACP.AddPortToAggr> Slot-1: Add port 1:1 to aggregator

09/27/2023 16:14:34.87 <Info:HAL.Card.Info> Slot-1: Upgrading VPEX BPE slot 100 image from ver 1.4.0.23 to 1.4.0.21 - Attempt #2 out of 3

09/27/2023 16:14:34.88 <Erro:tftpd.err> Slot-1: received error packet: 0: Closed by application

09/27/2023 16:14:34.88 <Erro:HAL.VPEX.Error> Slot-1: TFTP download failed for VPEX BPE slot 100

09/27/2023 16:14:35.38 <Info:vlan.msgs.portLinkStateDown> Slot-1: Port 1:1 link down

09/27/2023 16:14:35.38 <Info:vlan.dbg.info> Slot-1: Port 1:1 is Down, remove from aggregator 1:1

09/27/2023 16:14:35.38 <Info:LACP.RemPortFromAggr> Slot-1: Remove port 1:1 from aggregator

09/27/2023 16:14:36.15 <Info:HAL.Card.Info> Slot-1: Module in Slot-100 is removed

09/27/2023 16:14:36.15 <Info:HAL.Card.Info> Slot-1: Slot-100 down, resetting all TCP connections to it

 

How do I downgrade a BPE.

 

Regards,

Jose Chaves

0 REPLIES 0
GTM-P2G8KFN