compatibility with OEM SFP
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-26-2015 08:51 AM
I have some X8 and X670 switches with installed SR and LR transievers
Media Type : SF+_SR
Vendor Name : OPNEXT, INC.
Part Number : TRS2001EN-0006
Serial Number : 1334A-17101
Wavelength : 850 nm
Media Type : SF+_LR
Vendor Name : SumitomoElectric
Part Number : SPP5300LR-EN1
Serial Number : 1412L-40020
Wavelength : 1310 nm
Where i can find a compatibility matrix with that OEM SFP transceivers or any certification document?So we have problems with that transceivers, which one cause to hang up internal bus, and DOM information can not be readed.
Media Type : SF+_SR
Vendor Name : OPNEXT, INC.
Part Number : TRS2001EN-0006
Serial Number : 1334A-17101
Wavelength : 850 nm
Media Type : SF+_LR
Vendor Name : SumitomoElectric
Part Number : SPP5300LR-EN1
Serial Number : 1412L-40020
Wavelength : 1310 nm
Where i can find a compatibility matrix with that OEM SFP transceivers or any certification document?So we have problems with that transceivers, which one cause to hang up internal bus, and DOM information can not be readed.
3 REPLIES 3
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-26-2015 12:04 PM
Hi Artyom,
You can find which optics are supported on which platform in the EXOS Hardware/Software Compatibility Guide.
More detailed information on these optics is available in the Pluggable Hardware Installation Guide.
-Brandon
You can find which optics are supported on which platform in the EXOS Hardware/Software Compatibility Guide.
More detailed information on these optics is available in the Pluggable Hardware Installation Guide.
-Brandon
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-26-2015 12:04 PM
As far as I know, there is not a customer-facing document with information regarding the manufacturers of OEM optics.
Both of the optics listed above are Extreme certified and should be supported in the X670 and X8, so if you are experiencing issues with these optics, I would suggest opening a case with GTAC.
-Brandon
Both of the optics listed above are Extreme certified and should be supported in the X670 and X8, so if you are experiencing issues with these optics, I would suggest opening a case with GTAC.
-Brandon
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-26-2015 12:04 PM
Thank you for this links, but i not found there any information about OPNEXT or SumitomoElectric or other vendors of optics that are compatible/certified to use with Extreme swicthes.
