I wish to configure OSPF on a broadcast segment with 2x x620. When I attempted to do this I was surprised to find that if I wanted to set the interface priority to anything other than 0 (not eligable to be DR/BDR) that I am told I am not at a sufficient license level. I have an Advanced Edge license which is surely enough for me to be able to use a IGP.
SW-x620-1.1 # show conf ospf#
# Module ospf configuration.
#
configure ospf vlan VLAN-10 priority 0
SW-x620-1.2 # configure ospf vlan VLAN-10 priority 1
Error: This command cannot be executed at the current license level.
SW-x620-1.3 # show version
Switch :
PSU-1 :
PSU-2 :
Image : ExtremeXOS version 21.1.1.4 21.1.1.4-patch1-5 by release-manager
on Thu Jun 16 14:19:33 EDT 2016
BootROM : 1.0.1.8
Diagnostics : 5.4
SW-x620-1.4 # show lic
Enabled License Level:
Advanced Edge
Enabled Feature Packs:
None
System Type: X620-16x
I have rebooted after installing the license. Is there something else I need to do?
Any help, much appreciated.
