Dual 10G Upgrade in a Stack

[frankrichter]

Hi, I want to install a additional dual 10 G upgrade license to a member of the stack. I generated licenses for this members, but I don`t able to install this via ssh connection. The try ends with this message “Error: Unable to set license using supplied key”. How I can install this licenses?

Frank

[BradP]

Hi Frank,

Sure. Once you have SSH’d into the stack, please telnet to the proper slot where you want to apply the license by issuing the command “telnet slot <x>”. You should then be able to use “install license <key>” command successfully.

Brad

[frankrichter]

Hi Brad, thanks for response. It is a stack, consist of 3 Switches and I want to use 2 10GBe connections of every switch (stack member).

Frank

[BradP]

Hi Frank

I’m not sure if this is what you’re doing, but we’re unable to assign 2 Two 10G licenses in order to make 4 10G ports. A 4 port 10G license must be applied to the switch.

Thanks

Brad