We've previously used e4g's for pseudowires just passing a TDM circuit around via CES wires, but we now we're in a bing and need to bring up a circuit with IP services over TDM, does the e4g support this i can't for the life of me figure out the commands ... on our nokia it would look something like this...
controller E1 0/2
framing NO-CRC4
channel-group 0 timeslots 1-31
!
interface Serial1/0:2
description intranet
ip address 1.1.1.5 255.255.255.0
!
Was wondering if anyone had any tips/suggestions or knows if i'm looking for something that the e4g just doesn't support.
