Export direct and static to one bgp neighbor

[andreas1]

Is there any way to only export direct and/or static to a specific neighboor ? I can't figure out if I can do it in a route-policy or not ? I do not want to do it for the general bgp process. ( I would have to rewrite alot of export policys then ) But if that is the only way I have to do it I guess ? Or could I do a seperate network statement under bgp for that subnet specific ? One example 10.0.0.0/24 I want to send 10.0.0.0/30 to a specific neighboor that I is direclty connected to the router that runs BGP. // Andreas

[andreas1]

yes but this will not be specific to a BGP peer right ? This will be for ALL peers ? And I just want to annonce a static/direct entry to ONE peer not all peers ?

[Bharathiraja__S]

Hi Andreas,

I hope given kb is helpful , This KB is for exos based device.

Please check and let us know if you have any further questions.

Thanks,
Suresh.B

[Naresh]

Hi Andreas,

Please find the article to find “How to advertise selective routes via BGP” using below link,

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-selectively-advertise-static-routes...



Note: please test it before implementing on production switch.