cancel
Showing results for 
Search instead for 
Did you mean: 

High CPU utilization wanring due to cli process in BD Switch

High CPU utilization wanring due to cli process in BD Switch

Narender_kumar
New Contributor
07/06/2015 02:23:31.40 MSM-A: CPU utilization monitor: process cli consumes 68 %% CPU

Can someone help here to solve this problem or any short command ..

i had checked TOP command also but not able to see any process going above 2% at present ..

Regards,
Narender

6 REPLIES 6

PARTHIBAN_CHINN
Contributor
This should be an expected behaviour if you are executing 'show tech ' or show vlan info When you running other. Show commands do you see cli process spike ?

Hi Narender,

High CPU utilization from the CLI process is expected when running a show tech. This produces a large amount of text output, which is CPU intensive. If this is only occurring while running show tech, this would be expected behavior.

-Brandon

Hi ,

Yes CLI Process can increasing utilization when we are using Show tech but
due to same CPU utilization can touch 67% , i am not confident .

Can we check how to find issue of High Utilization ...

Kawawa
Extreme Employee
What version of XOS are you running and are you connecting to the Switch via the web console?
GTM-P2G8KFN