How to setup sharing in MLAG for Windows Server NIC Teaming ?

[Robert_Zdzieblo]

Hello,

What is the best sharing algorithm for connecting Windows Server 2012 NIC teaming ?
We have a MLAG disign at the core and NIC teaming mode on Windows is switch independent.

I guess LACP is not good choice here (?).

REGARDS

[Brian_Anderson]

Found an article that alludes to the single port share: https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-MLAG-in-Extreme-switches

Towards the bottom: Please also note if the downstream device (e.g. switch, server, etc..) is using LACP LAG sharing on its ports, it will be necessary to enable LACP LAG on the MLAG ports. This has to be done prior to enabling the port for mlag

[Brian_Anderson]

Is mlag peer isc_core the correct name used for both? I believe they should be different.
Edit: just checked a config. Looks like they can be the same.

something comes to mind about single port share. Have you tried setting up a single port share on each mlag peer for on the port the server is connected to?