cancel
Showing results for 
Search instead for 
Did you mean: 

Initial Configuration BD8810

Initial Configuration BD8810

Mario_Cruz_Torr
New Contributor
Hello Expert,

Im start configuring my first BD8810:

First I want to upgrade the node, but for that I configure a vlan with an IP Address but Im unable to ping the IP. [My computer has the 192.168.1.2/24]

This is my config:

enable port 1:1
create vlan "test"
configure vlan test tag 10
configure vlan test add ports 1:1 untagged
configure vlan test ipaddress 192.168.1.1 255.255.255.0
enable ipforwarding vlan test

There is something that I missing?? Maybe something new for the BlackDiamonds

Thanks
19 REPLIES 19

Bin
Extreme Employee
Hi,
There is the article for ”Diagnostics” EXOS.

How to Diagnose-hardware failures using EXOS
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Diagnose-hardware-failures-using-EX...

Best regards,

Andrew_Imam
Extreme Employee
Mario,

Thanks for the update. I would suggest running extended diagnostics on the removed MSM (if you can insert it in another lab chassis if available), your can use the command" "run diagnostics extended msm " to run the extended diags. This will reboot the MSM, and run the diag tests. When the tests are co...




Mario_Cruz_Torr
New Contributor
Hello,

I think we solve the issue we removed the MSM Master and change it. After this the ping was ok..

Do you think that this card is faulty?

Thanks everyone

Mario Cruz

Andrew_Imam
Extreme Employee
Hi Mario,

Your config looks OK to me. I still suspect an issue with the FW on your computer. Can you try to totally disable it again, restart the PC and retest. Please let us know the outcome after performing those steps. Thank you.

Best regards,
Andrew
GTM-P2G8KFN