Trying to set up vman across an ISP supplied network ( Cisco ) L2 connectivity . ICMP is not barred ..
The vman vlan has been given an IP address 192.168.200.200 ( A end )
192.168.200.100 ( B END ) with the Cisco ISP network in between
In the IPARP table (A end ) I can see an entry for the 192.168.200.100 address with the correct mac address of the remote Extreme switch ..
A end hardware X670-48X Vman termination
When I try to ping this address 192.168.200.100
# ping 192.168.200.100Ping(ICMP) 192.168.200.100: 4 packets, 8 data bytes, interval 1 second(s).
#
--- 192.168.200.100 ping statistics ---
4 packets transmitted, 0 packets received, 100% loss
round-trip min/avg/max = 0/0/0 ms
A end
configure vlan 4089 ipaddress 192.168.200.200 255.255.255.0
sh conf | include
vman configure vman ethertype 0x8100
create vman "4089"
configure vman 4089 tag 4089
configure vman 4089 add ports 1:48 tagged ( to ISP 10G)
configure vman 4089 add ports 1:47 untagged ( to X670-48T
B end
Hardware X670-48X using 10gig dat link to palo
configure vlan 4089 ipaddress 192.168.200.100 255.255.255.0
sh conf | include
vmanconfigure vman ethertype 0x8100
create vman "4089"
configure vman 4089 tag 4089
configure vman 4089 add ports 33 tagged ( to ISP 10G)
configure vman 4089 add ports 39 untagged ( Palo-Alto )
I have just upgraded both switches at the a end to SummitX-15.6.4.2-patch1-6.xos
