hi ,
i am using X460-24t extreme switch.
here is my setup
mydevice with two links configured in lacp mode --- extreme switch port 3
|
|
extreme switch port4
I have set vlan 3001 on port 3 as tagged with ip 172.16.254.1 . I run ping to it from my device with ip 172.16.254.2 .
I want to set lacp on port 3(master) and 4.
so , I ran
# enable sharing 3 grouping 3,4 algorithm address-based lacp
Question 1) had I used #enable sharing 3 grouping 3,4 lacp , what would be the difference ?
Question 2) Any specific command to see port sharing status ?
