Create Date: May 26 2013 10:10AM
Hi Expert,
I am using two switch with different version and hardware but all are extremeware product.
I am facing problem for LAG port congestion but utilization is below 50% . there is no system log .
How can it be solve, please suggest.
LAG between BD-8810 <> Alpine3804
BD-8810(DHK2SIBD1):-
===============
Image : ExtremeXOS version 12.3.2.5 v1232b5 by release-manager
BootROM : 1.0.4.2
Alpine3804(DHK2SI1):-
===============
Image : Extremeware Version 7.8.1.1
BootROM : 8.2
Ports congestion Log:-
=========================
BD-8810 # show ports 3:41-42 congestion
Port Congestion Monitor Tue May 21 15:21:26 2013
Port Link Packet
State Drop
================================================================================
3:41 A 954
3:42 A 134
Alpine3804:-
dont know how to check congestion , i think it does not support.
Ports Utilizationlog BD-8810 <> Alpine3804
BD-8810(DHK2SIBD1):-
=====================
-----------------------------------------------------------------------------------------------------------------------------------
DHK2SIBD1.5 # show ports 3:1 , 4:4 , 3:41, 3:42 utilization
Link Utilization Averages Wed May 22 15:44:58 2013
Port Link Link Rx Peak Rx Tx Peak Tx
State Speed % bandwidth % bandwidth % bandwidth % bandwidth
================================================================================
DHK2SI1 A 1000 38.08 48.22 25.29 32.50
3:41 A 1000 38.91 49.60 48.51 59.64
3:42 A 1000 38.59 48.48 45.75 55.48
To_DHK2S> A 1000 37.24 47.59 24.83 31.43
-------------------------------------------------------------------------------------------------------------------------------------
Alpine3804 (DHK2SI1):
=====================
Link Utilization Averages Wed May 22 16:10:12 2013
Port Link Link Receive Peak Rx Transmit Peak Transmit
Status Speed % bandwidth % bandwidth % bandwidth % bandwidth
======================================================================================
4:9 A 1000 25.52 67.41 38.13 51.49
4:10 A 1000 45.97 100.00 38.42 100.00
DHK2SIBD1 A 1000 48.38 100.00 39.20 100.00
To_DHK2SIBD1 A 1000 24.89 37.94 37.77 52.63
Ports Sharing configuration:-
==============================
BD-8810 <> Alpine3804
BD-8810(DHK2SIBD1):-
enable sharing 3:1 grouping 3:1, 3:41-42, 4:4, algorithm address-based L2
Alpine3804 (DHK2SI1):
enable sharing 4:9 grouping 4:9,4:10,4:12,4:16 algorithm address-based
Please reply.
(from M._Nabi)
