LLDP not working for polycom, but working for Cisco phones on x460-G2

[Eric_Burke]

We have two phones, one Polycom VVW310 and a Cisco 7911 plugged into sequential ports on our stack. They are configured with the same LLDP configuration and the Cisco joins the proper voip network while the polycom does not. In the neighbor details, the only difference seems to be in the policy section. The polycom shows "unknown policy" and the cisco shows "known policy". Any ideas?

-----------------------------------------------------------------------------

LLDP Port 1:15 detected 1 neighbor

Neighbor: (5.1)0.0.0.0/00:04:F2:8C:4F:5D, age 59 seconds

- Chassis ID type: Network address (5); Address type: IPv4 (1)

Chassis ID : 0.0.0.0

- Port ID type: MAC address (3)

Port ID : 00:04:F2:8C:4F:5D

- Time To Live: 120 seconds

- Port Description: "1"

- System Name: "Polycom VVX 310"

- System Description: "Polycom;VVX-VVX_310;3111-46161-001,2;SIP/4.1.8.06\

28/30-Sep-14 00:40;UP/5.1.8.0598/30-Sep-14 01:08;"

- System Capabilities : "Bridge, Telephone"

Enabled Capabilities: "Telephone"

- IEEE802.3 MAC/PHY Configuration/Status

Auto-negotiation : Supported, Enabled (0x03)

Operational MAU Type : 1000BaseTFD (30)

- MED Capabilities: "MED Capabilities, Network Policy, Extended Power via MDI - PD, Inventory"

MED Device Type : Endpoint Class III (3)

- MED Network Policy

Application Type : Voice (1)

Policy Flags : Unknown Policy, Untagged (0x0)

VLAN ID : 0

L2 Priority : 5

DSCP Value : 46

- MED Network Policy

Application Type : Voice Signaling (2)

Policy Flags : Unknown Policy, Untagged (0x0)

VLAN ID : 0

L2 Priority : 5

DSCP Value : 44

- MED Extended Power-via-MDI

Power Type : PD Device (1)

Power Source : PSE and Local (3)

Power Priority: Unknown (0)

Power Value : 5.0 Watts

- MED Hardware Revision: "3111-46161-001,2"

- MED Firmware Revision: "UP/5.1.8.0598/30-Sep-14 01:08"

- MED Software Revision: "SIP/4.1.8.0628/30-Sep-14 00:40"

- MED Serial Number: "0004f28c4f5d"

- MED Manufacturer Name: "Polycom"

- MED Model Name: "VVX-VVX_310"

- MED Asset ID: ""



LLDP Port 1:16 detected 1 neighbor

Neighbor: (5.1)10.91.0.30/002584178E5F:P1, age 24 seconds

- Chassis ID type: Network address (5); Address type: IPv4 (1)

Chassis ID : 10.91.0.30

- Port ID type: Locally assigned (7)

Port ID : "002584178E5F:P1"

- Time To Live: 180 seconds

- Port Description: "SW PORT"

- System Name: "SEP002584178E5F"

- System Description: "Cisco IP Phone CP-7911G,V8, SCCP11.8-4-4S"

- System Capabilities : "Bridge, Telephone"

Enabled Capabilities: "Bridge, Telephone"

- Management Address Subtype: IPv4 (1)

Management Address : 10.91.0.30

Interface Number Subtype : Unknown (1)

Interface Number : 0

Object ID String : "null"

- IEEE802.3 MAC/PHY Configuration/Status

Auto-negotiation : Supported, Enabled (0x03)

Operational MAU Type : 100BaseTXFD (16)

- MED Capabilities: "MED Capabilities, Network Policy, Extended Power via MDI - PD, Inventory"

MED Device Type : Endpoint Class III (3)

- MED Network Policy

Application Type : Voice (1)

Policy Flags : Known Policy, Tagged (0x1)

VLAN ID : 900

L2 Priority : 5

DSCP Value : 46

- MED Network Policy

Application Type : Voice Signaling (2)

Policy Flags : Known Policy, Tagged (0x1)

VLAN ID : 900

L2 Priority : 4

DSCP Value : 32

- MED Extended Power-via-MDI

Power Type : PD Device (1)

Power Source : Unknown (0)

Power Priority: Unknown (0)

Power Value : 5.0 Watts

- MED Hardware Revision: "8"

- MED Firmware Revision: "tnp11.3-0-1-32.bin"

- MED Software Revision: "SCCP11.8-4-4S"

- MED Serial Number: "FCH132097PD"

- MED Manufacturer Name: "Cisco Systems, Inc."

- MED Model Name: "CP-7911G"

- MED Asset ID: ""

[Stephane_Grosj1]

Hi,

I'm not an expert with LLDP-MED related configuration, but let me try to share my ignorance.

Can you please capture what the phone/switch are sending? googling a bit I have read a few issues with Polycom and the presence of optional TLV set to null. It would be interesting to check that first.

Can you paste the LLDP config as well?

and Merry Christmas!

[Eric_Burke]

Bump - anyone have any ideas?