Route VLAN traffic between two locations with GRE tunneling (With EXOS)

[Ashwini_Balacha]

We have x460 extreme switches in two different locations connected with L3 networking. I would like some suggestions on extending the vlan from one location to the other over l3. When I read about this, I realized that one of my option is L2-GRE and EXOS does not support it. Can I do this configuration using L3-GRE tunneling?
Please provide me some guidance on this.

[Narayanan__Kart]

Hi Ashwini,

In the given example the tunnel is over OSPF. I am not sure about your switches configuration. If possible please provide us the same.

Our suggestion would be to create a GTAC case so that we can review the configuration and topology and will suggest you further.

Regards,
Karthikeyan

[Ashwini_Balacha]

No I am doing these configurations tomorrow. Wasn't sure about ospf settings. Currently there are two x460 switches in different locations between which I am planning to create tunnel. I didn't understand the configuration in your example. Could you please explain how are the three switches connected? Regards, Ashwini

[Narayanan__Kart]

Hi Ashwani,

Did you get a chance to try the suggested configuration?

Regards,
Karthikeyan

[Narayanan__Kart]

Thank you for the update. I think then the provided configuration will be enough for your requirement. Please let us know if you need any more information.

Regards,
Karthikeyan

[Ashwini_Balacha]

Yes.. I am trying to create tunnel between two x460 extreme switches which are physically separated. Server in location 1 (no public IP address)needs to communicate to other end devices in location 2.Thank you very much for all the support and configuration details.