save current config in a file in extreme switch

[sumeet]

we have summit X460-24t switch

usually I telnet to it and run
show config
log the contents of telnet session to a file
The problem is when screen fills up I get 'press space to continue or q to quit' , then I have to press space .
Is there a better way to get current config ?

Thanks.

[Tripathy__Priya]

The better option for this to achieve would be to execute disable clipaging so that you get the output in one stretch and later if you want can enable this which is thew default set up for Exos platform. Moreover to get into specific info for the config can always use pipeline character specifying your requirements.

[Erik_Auerswald]

Sumeet, this may be a problem with the old EXOS version.

[Tripathy__Priya]

I suppose you have X460 hardware with you and why you are on software release which is unsupported one. I tried this is absolutely having no issue from 15.3.5 onwards. Though the recommended version is 16.1.3.6 anyway.

[sumeet]

i am telnetting to an IP address of vlan configured on switch via gnome-terminal 3.6.2
My switch has ExtremeXOS version 12.5.4.5 v1254b...