This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Extreme Networks
- Community List
- Switching & Routing
- ExtremeSwitching (EXOS/Switch Engine)
- RE: strange vlan tag state
Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
strange vlan tag state
strange vlan tag state
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-17-2015 08:59 AM
Hi all!
Why vlan have both flag ! and * ?
What does it mean?
#show vlan tag 350
VLAN Interface with name PTP_rt1_msk-rt7_msk created by user
Admin State: Enabled Tagging: 802.1Q Tag 350
Description: None
Virtual router: VR-Default
IPv4 Forwarding: Disabled
IPv4 MC Forwarding: Disabled
IPv6 Forwarding: Disabled
IPv6 MC Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
OpenFlow: Disabled
TRILL: Disabled
QosProfile: None configured
Egress Rate Limit Designated Port: None configured
Flood Rate Limit QosProfile: None configured
Ports: 2. (Number of active ports=2)
Tag: !*46g, *39g
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (m) Mac-Based port
(a) Egress traffic allowed for NetLogin
(u) Egress traffic unallowed for NetLogin
(t) Translate VLAN tag for Private-VLAN
(s) Private-VLAN System Port, (L) Loopback port
(x) VMAN Tag Translated port
(G) Multi-switch LAG Group port
(H) Dynamically added by MVRP
(D) TRILL Designated, (A) TRILL Appointed Forwarder
(I) Dynamically added by IDM
(U) Dynamically added uplink port
(V) Dynamically added by VM Tracking
Why vlan have both flag ! and * ?
What does it mean?
#show vlan tag 350
VLAN Interface with name PTP_rt1_msk-rt7_msk created by user
Admin State: Enabled Tagging: 802.1Q Tag 350
Description: None
Virtual router: VR-Default
IPv4 Forwarding: Disabled
IPv4 MC Forwarding: Disabled
IPv6 Forwarding: Disabled
IPv6 MC Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
OpenFlow: Disabled
TRILL: Disabled
QosProfile: None configured
Egress Rate Limit Designated Port: None configured
Flood Rate Limit QosProfile: None configured
Ports: 2. (Number of active ports=2)
Tag: !*46g, *39g
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (m) Mac-Based port
(a) Egress traffic allowed for NetLogin
(u) Egress traffic unallowed for NetLogin
(t) Translate VLAN tag for Private-VLAN
(s) Private-VLAN System Port, (L) Loopback port
(x) VMAN Tag Translated port
(G) Multi-switch LAG Group port
(H) Dynamically added by MVRP
(D) TRILL Designated, (A) TRILL Appointed Forwarder
(I) Dynamically added by IDM
(U) Dynamically added uplink port
(V) Dynamically added by VM Tracking
15 REPLIES 15
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-17-2015 10:31 AM
# show vlan tag 383
VLAN Interface with name rt1_msk-sw120_msk_MPLS created by user
Admin State: Enabled Tagging: 802.1Q Tag 383
Description: None
Virtual router: VR-Default
IPv4 Forwarding: Enabled
IPv4 MC Forwarding: Disabled
Primary IP: 10.10.13.194/30
IPv6 Forwarding: Enabled
IPv6 MC Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
OpenFlow: Disabled
TRILL: Disabled
QosProfile: None configured
Egress Rate Limit Designated Port: None configured
Flood Rate Limit QosProfile: None configured
MPLS: LDP and RSVP-TE
Ports: 1. (Number of active ports=1)
Tag: !*46g
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (m) Mac-Based port
(a) Egress traffic allowed for NetLogin
(u) Egress traffic unallowed for NetLogin
(t) Translate VLAN tag for Private-VLAN
(s) Private-VLAN System Port, (L) Loopback port
(x) VMAN Tag Translated port
(G) Multi-switch LAG Group port
(H) Dynamically added by MVRP
(D) TRILL Designated, (A) TRILL Appointed Forwarder
(I) Dynamically added by IDM
(U) Dynamically added uplink port
(V) Dynamically added by VM Tracking
VLAN Interface with name rt1_msk-sw120_msk_MPLS created by user
Admin State: Enabled Tagging: 802.1Q Tag 383
Description: None
Virtual router: VR-Default
IPv4 Forwarding: Enabled
IPv4 MC Forwarding: Disabled
Primary IP: 10.10.13.194/30
IPv6 Forwarding: Enabled
IPv6 MC Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
OpenFlow: Disabled
TRILL: Disabled
QosProfile: None configured
Egress Rate Limit Designated Port: None configured
Flood Rate Limit QosProfile: None configured
MPLS: LDP and RSVP-TE
Ports: 1. (Number of active ports=1)
Tag: !*46g
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (m) Mac-Based port
(a) Egress traffic allowed for NetLogin
(u) Egress traffic unallowed for NetLogin
(t) Translate VLAN tag for Private-VLAN
(s) Private-VLAN System Port, (L) Loopback port
(x) VMAN Tag Translated port
(G) Multi-switch LAG Group port
(H) Dynamically added by MVRP
(D) TRILL Designated, (A) TRILL Appointed Forwarder
(I) Dynamically added by IDM
(U) Dynamically added uplink port
(V) Dynamically added by VM Tracking
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-17-2015 10:08 AM
What he is saying is this port is added to multiple vlans. Can you do the show vlan on other vlans and see if the port is showing the same thing?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-17-2015 10:08 AM
Hi all
sw116.4 # show version Switch : 800400-00-06 1211G-02762 Rev 6.0 BootROM: 2.0.1.6 IMG: 15.4.1.3
PSU-1 : Internal PSU-1 800282-00-04 1210K-82000
PSU-2 : Internal PSU-2 800282-00-04 1210K-81993
Image : ExtremeXOS version 15.4.1.3 v1541b3-patch1-13 by release-manager
on Tue Jun 24 12:17:04 EDT 2014
BootROM : 2.0.1.6
Diagnostics : 6.3
sw116.4 # show sharing
Load Sharing Monitor
Config Current Agg Ld Share Ld Share Agg Link Link Up
Master Master Control Algorithm Group Mbr State Transitions
==============================================================================
1 1 LACP custom 1 Y A 0
custom 2 Y A 0
custom 3 Y A 0
custom 4 Y A 0
custom 5 Y A 0
9 9 LACP custom 9 Y A 0
custom 10 Y A 0
12 LACP custom 12 - R 0
13 13 LACP custom 13 Y A 0
20 20 LACP custom 20 Y A 0
custom 21 Y A 0
25 25 LACP custom 25 Y A 0
custom 26 Y A 0
27 27 LACP custom 27 Y A 0
custom 29 Y A 0
custom 40 - R 0
custom 35 Y A 0
31 31 LACP custom 31 Y A 0
custom 32 Y A 0
33 33 LACP custom 33 Y A 0
34 LACP custom 34 - R 0
36 36 LACP custom 36 Y A 0
custom 37 Y A 0
43 LACP custom 43 - R 0
custom 44 - R 0
==============================================================================
Link State: A-Active, D-Disabled, R-Ready, NP-Port not present, L-Loopback
Load Sharing Algorithm: (L2) Layer 2 address based, (L3) Layer 3 address based
(L3_L4) Layer 3 address and Layer 4 port based
(custom) User-selected address-based configuration
Custom Algorithm Configuration: ipv4 source-and-destination, crc-32 lower
Number of load sharing trunks: 12
sw2.ekt.1 # show version
Switch : 800400-00-08 1219G-02960 Rev 8.0 BootROM: 2.0.1.7 IMG: 15.7.2.9
PSU-1 : Internal PSU-1 800282-00-04 1223K-81696
PSU-2 : Internal PSU-2 800282-00-04 1218K-80223
Image : ExtremeXOS version 15.7.2.9 v1572b9 by release-manager
on Wed Jul 8 16:27:07 EDT 2015
BootROM : 2.0.1.7
Diagnostics : 6.3
sw2.ekt.2 # show sharing
Load Sharing Monitor
Config Current Agg Min Ld Share Ld Share Agg Link Link Up
Master Master Control Active Algorithm Group Mbr State Transitions
================================================================================
41 41 LACP 1 custom 41 Y A 2
custom 42 - R 0
48 47 LACP 1 custom 47 Y A 4
custom 48 Y A 4
================================================================================
Link State: A-Active, D-Disabled, R-Ready, NP-Port not present, L-Loopback
Minimum Active: (<) Group is down. # active links less than configured minimum
Load Sharing Algorithm: (L2) Layer 2 address based, (L3) Layer 3 address based
(L3_L4) Layer 3 address and Layer 4 port based
(custom) User-selected address-based configuration
Custom Algorithm Configuration: ipv4 source-and-destination, crc-32 lower
Number of load sharing trunks: 2
* sw120.1 # show version
Switch : 800400-00-06 1211G-02754 Rev 6.0 BootROM: 2.0.1.6 IMG: 15.6.3.1
PSU-1 : Internal PSU-1 800282-00-04 1210K-81997
PSU-2 : Internal PSU-2 800282-00-04 1210K-82001
Image : ExtremeXOS version 15.6.3.1 v1563b1-patch1-5 by release-manager
on Sun Aug 16 21:34:14 EDT 2015
BootROM : 2.0.1.6
Diagnostics : 6.3
* sw120.2 # show sharing
Load Sharing Monitor
Config Current Agg Ld Share Ld Share Agg Link Link Up
Master Master Control Algorithm Group Mbr State Transitions
==============================================================================
39 39 LACP custom 39 Y A 2
40 LACP custom 40 - R 0
custom 41 - R 0
42 42 LACP custom 42 Y A 1
46 45 LACP custom 43 - R 0
custom 44 - R 0
custom 45 Y A 4
custom 46 Y A 2
47 LACP custom 47 - R 0
custom 48 - R 0
==============================================================================
Link State: A-Active, D-Disabled, R-Ready, NP-Port not present, L-Loopback
Load Sharing Algorithm: (L2) Layer 2 address based, (L3) Layer 3 address based
(L3_L4) Layer 3 address and Layer 4 port based
(custom) User-selected address-based configuration
Custom Algorithm Configuration: ipv4 L3-and-L4, xor
Number of load sharing trunks: 5
* sw120.3 # show vlan ports 42
-----------------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
-----------------------------------------------------------------------------------------------
sw120_msk-rt3_msk_MPLS 367 10.10.13.189 /30 -f-------o-----------l------- ANY 1 /1 VR-Default
-----------------------------------------------------------------------------------------------
Flags : (B) BFD Enabled, (c) 802.1ad customer VLAN, (C) EAPS Control VLAN,
(d) Dynamically created VLAN, (D) VLAN Admin Disabled,
(e) CES Configured, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(F) Learning Disabled, (h) TRILL Enabled, (i) ISIS Enabled,
(I) Inter-Switch Connection VLAN for MLAG, (k) PTP Configured,
(l) MPLS Enabled, (L) Loopback Enabled, (m) IPmc Forwarding Enabled,
(M) Translation Member VLAN or Subscriber VLAN, (n) IP Multinetting Enabled,
(N) Network Login VLAN, (o) OSPF Enabled, (O) Flooding Disabled,
(p) PIM Enabled, (P) EAPS protected VLAN, (r) RIP Enabled,
(R) Sub-VLAN IP Range Configured, (s) Sub-VLAN, (S) Super-VLAN,
(t) Translation VLAN or Network VLAN, (T) Member of STP Domain,
(v) VRRP Enabled, (V) VPLS Enabled, (W) VPWS Enabled, (Z) OpenFlow Enabled
Total number of VLAN(s) : 8 (1 displayed)
* sw120.4 # show vlan tag 367
VLAN Interface with name sw120_msk-rt3_msk_MPLS created by user
Admin State: Enabled Tagging: 802.1Q Tag 367
Description: None
Virtual router: VR-Default
IPv4 Forwarding: Enabled
IPv4 MC Forwarding: Disabled
Primary IP: 10.10.13.189/30
IPv6 Forwarding: Enabled
IPv6 MC Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
OpenFlow: Disabled
TRILL: Disabled
QosProfile: None configured
Egress Rate Limit Designated Port: None configured
Flood Rate Limit QosProfile: None configured
MPLS: LDP and RSVP-TE
Ports: 1. (Number of active ports=1)
Tag: *42g
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (m) Mac-Based port
(a) Egress traffic allowed for NetLogin
(u) Egress traffic unallowed for NetLogin
(t) Translate VLAN tag for Private-VLAN
(s) Private-VLAN System Port, (L) Loopback port
(x) VMAN Tag Translated port
(G) Multi-switch LAG Group port
(H) Dynamically added by MVRP
(D) TRILL Designated, (A) TRILL Appointed Forwarder
(I) Dynamically added by IDM
(U) Dynamically added uplink port
(V) Dynamically added by VM Tracking
* sw120.5 # show vlan ports 45
-----------------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
-----------------------------------------------------------------------------------------------
GGC-SERVERS 883 ------------------------------------------------- ANY 4 /4 VR-Default
PTP_rt1_msk-rt7_msk 350 ------------------------------------------------- ANY 2 /2 VR-Default
rt1_msk-sw120_msk_MPLS 383 10.10.13.194 /30 -f-------o-----------l------- ANY 1 /1 VR-Default
rt6-msk-rt1-msk_v160 102 ------------------------------------------------- ANY 1 /2 VR-Default
-----------------------------------------------------------------------------------------------
Flags : (B) BFD Enabled, (c) 802.1ad customer VLAN, (C) EAPS Control VLAN,
(d) Dynamically created VLAN, (D) VLAN Admin Disabled,
(e) CES Configured, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(F) Learning Disabled, (h) TRILL Enabled, (i) ISIS Enabled,
(I) Inter-Switch Connection VLAN for MLAG, (k) PTP Configured,
(l) MPLS Enabled, (L) Loopback Enabled, (m) IPmc Forwarding Enabled,
(M) Translation Member VLAN or Subscriber VLAN, (n) IP Multinetting Enabled,
(N) Network Login VLAN, (o) OSPF Enabled, (O) Flooding Disabled,
(p) PIM Enabled, (P) EAPS protected VLAN, (r) RIP Enabled,
(R) Sub-VLAN IP Range Configured, (s) Sub-VLAN, (S) Super-VLAN,
(t) Translation VLAN or Network VLAN, (T) Member of STP Domain,
(v) VRRP Enabled, (V) VPLS Enabled, (W) VPWS Enabled, (Z) OpenFlow Enabled
Total number of VLAN(s) : 8 (4 displayed)
* sw120.6 # show vlan tag 883
VLAN Interface with name GGC-SERVERS created by user
Admin State: Enabled Tagging: 802.1Q Tag 883
Description: None
Virtual router: VR-Default
IPv4 Forwarding: Disabled
IPv4 MC Forwarding: Disabled
IPv6 Forwarding: Disabled
IPv6 MC Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
OpenFlow: Disabled
TRILL: Disabled
QosProfile: None configured
Egress Rate Limit Designated Port: None configured
Flood Rate Limit QosProfile: None configured
Ports: 4. (Number of active ports=4)
Untag: *1(GGC-SERVERS),*2(GGC-SERVERS),*3(GGC-SERVERS)
Tag: !*46g
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (m) Mac-Based port
(a) Egress traffic allowed for NetLogin
(u) Egress traffic unallowed for NetLogin
(t) Translate VLAN tag for Private-VLAN
(s) Private-VLAN System Port, (L) Loopback port
(x) VMAN Tag Translated port
(G) Multi-switch LAG Group port
(H) Dynamically added by MVRP
(D) TRILL Designated, (A) TRILL Appointed Forwarder
(I) Dynamically added by IDM
(U) Dynamically added uplink port
(V) Dynamically added by VM Tracking
Where the master-port changet we see trouble with "(!) Disabled"
sw116.4 # show version Switch : 800400-00-06 1211G-02762 Rev 6.0 BootROM: 2.0.1.6 IMG: 15.4.1.3
PSU-1 : Internal PSU-1 800282-00-04 1210K-82000
PSU-2 : Internal PSU-2 800282-00-04 1210K-81993
Image : ExtremeXOS version 15.4.1.3 v1541b3-patch1-13 by release-manager
on Tue Jun 24 12:17:04 EDT 2014
BootROM : 2.0.1.6
Diagnostics : 6.3
sw116.4 # show sharing
Load Sharing Monitor
Config Current Agg Ld Share Ld Share Agg Link Link Up
Master Master Control Algorithm Group Mbr State Transitions
==============================================================================
1 1 LACP custom 1 Y A 0
custom 2 Y A 0
custom 3 Y A 0
custom 4 Y A 0
custom 5 Y A 0
9 9 LACP custom 9 Y A 0
custom 10 Y A 0
12 LACP custom 12 - R 0
13 13 LACP custom 13 Y A 0
20 20 LACP custom 20 Y A 0
custom 21 Y A 0
25 25 LACP custom 25 Y A 0
custom 26 Y A 0
27 27 LACP custom 27 Y A 0
custom 29 Y A 0
custom 40 - R 0
custom 35 Y A 0
31 31 LACP custom 31 Y A 0
custom 32 Y A 0
33 33 LACP custom 33 Y A 0
34 LACP custom 34 - R 0
36 36 LACP custom 36 Y A 0
custom 37 Y A 0
43 LACP custom 43 - R 0
custom 44 - R 0
==============================================================================
Link State: A-Active, D-Disabled, R-Ready, NP-Port not present, L-Loopback
Load Sharing Algorithm: (L2) Layer 2 address based, (L3) Layer 3 address based
(L3_L4) Layer 3 address and Layer 4 port based
(custom) User-selected address-based configuration
Custom Algorithm Configuration: ipv4 source-and-destination, crc-32 lower
Number of load sharing trunks: 12
sw2.ekt.1 # show version
Switch : 800400-00-08 1219G-02960 Rev 8.0 BootROM: 2.0.1.7 IMG: 15.7.2.9
PSU-1 : Internal PSU-1 800282-00-04 1223K-81696
PSU-2 : Internal PSU-2 800282-00-04 1218K-80223
Image : ExtremeXOS version 15.7.2.9 v1572b9 by release-manager
on Wed Jul 8 16:27:07 EDT 2015
BootROM : 2.0.1.7
Diagnostics : 6.3
sw2.ekt.2 # show sharing
Load Sharing Monitor
Config Current Agg Min Ld Share Ld Share Agg Link Link Up
Master Master Control Active Algorithm Group Mbr State Transitions
================================================================================
41 41 LACP 1 custom 41 Y A 2
custom 42 - R 0
48 47 LACP 1 custom 47 Y A 4
custom 48 Y A 4
================================================================================
Link State: A-Active, D-Disabled, R-Ready, NP-Port not present, L-Loopback
Minimum Active: (<) Group is down. # active links less than configured minimum
Load Sharing Algorithm: (L2) Layer 2 address based, (L3) Layer 3 address based
(L3_L4) Layer 3 address and Layer 4 port based
(custom) User-selected address-based configuration
Custom Algorithm Configuration: ipv4 source-and-destination, crc-32 lower
Number of load sharing trunks: 2
* sw120.1 # show version
Switch : 800400-00-06 1211G-02754 Rev 6.0 BootROM: 2.0.1.6 IMG: 15.6.3.1
PSU-1 : Internal PSU-1 800282-00-04 1210K-81997
PSU-2 : Internal PSU-2 800282-00-04 1210K-82001
Image : ExtremeXOS version 15.6.3.1 v1563b1-patch1-5 by release-manager
on Sun Aug 16 21:34:14 EDT 2015
BootROM : 2.0.1.6
Diagnostics : 6.3
* sw120.2 # show sharing
Load Sharing Monitor
Config Current Agg Ld Share Ld Share Agg Link Link Up
Master Master Control Algorithm Group Mbr State Transitions
==============================================================================
39 39 LACP custom 39 Y A 2
40 LACP custom 40 - R 0
custom 41 - R 0
42 42 LACP custom 42 Y A 1
46 45 LACP custom 43 - R 0
custom 44 - R 0
custom 45 Y A 4
custom 46 Y A 2
47 LACP custom 47 - R 0
custom 48 - R 0
==============================================================================
Link State: A-Active, D-Disabled, R-Ready, NP-Port not present, L-Loopback
Load Sharing Algorithm: (L2) Layer 2 address based, (L3) Layer 3 address based
(L3_L4) Layer 3 address and Layer 4 port based
(custom) User-selected address-based configuration
Custom Algorithm Configuration: ipv4 L3-and-L4, xor
Number of load sharing trunks: 5
* sw120.3 # show vlan ports 42
-----------------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
-----------------------------------------------------------------------------------------------
sw120_msk-rt3_msk_MPLS 367 10.10.13.189 /30 -f-------o-----------l------- ANY 1 /1 VR-Default
-----------------------------------------------------------------------------------------------
Flags : (B) BFD Enabled, (c) 802.1ad customer VLAN, (C) EAPS Control VLAN,
(d) Dynamically created VLAN, (D) VLAN Admin Disabled,
(e) CES Configured, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(F) Learning Disabled, (h) TRILL Enabled, (i) ISIS Enabled,
(I) Inter-Switch Connection VLAN for MLAG, (k) PTP Configured,
(l) MPLS Enabled, (L) Loopback Enabled, (m) IPmc Forwarding Enabled,
(M) Translation Member VLAN or Subscriber VLAN, (n) IP Multinetting Enabled,
(N) Network Login VLAN, (o) OSPF Enabled, (O) Flooding Disabled,
(p) PIM Enabled, (P) EAPS protected VLAN, (r) RIP Enabled,
(R) Sub-VLAN IP Range Configured, (s) Sub-VLAN, (S) Super-VLAN,
(t) Translation VLAN or Network VLAN, (T) Member of STP Domain,
(v) VRRP Enabled, (V) VPLS Enabled, (W) VPWS Enabled, (Z) OpenFlow Enabled
Total number of VLAN(s) : 8 (1 displayed)
* sw120.4 # show vlan tag 367
VLAN Interface with name sw120_msk-rt3_msk_MPLS created by user
Admin State: Enabled Tagging: 802.1Q Tag 367
Description: None
Virtual router: VR-Default
IPv4 Forwarding: Enabled
IPv4 MC Forwarding: Disabled
Primary IP: 10.10.13.189/30
IPv6 Forwarding: Enabled
IPv6 MC Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
OpenFlow: Disabled
TRILL: Disabled
QosProfile: None configured
Egress Rate Limit Designated Port: None configured
Flood Rate Limit QosProfile: None configured
MPLS: LDP and RSVP-TE
Ports: 1. (Number of active ports=1)
Tag: *42g
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (m) Mac-Based port
(a) Egress traffic allowed for NetLogin
(u) Egress traffic unallowed for NetLogin
(t) Translate VLAN tag for Private-VLAN
(s) Private-VLAN System Port, (L) Loopback port
(x) VMAN Tag Translated port
(G) Multi-switch LAG Group port
(H) Dynamically added by MVRP
(D) TRILL Designated, (A) TRILL Appointed Forwarder
(I) Dynamically added by IDM
(U) Dynamically added uplink port
(V) Dynamically added by VM Tracking
* sw120.5 # show vlan ports 45
-----------------------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
-----------------------------------------------------------------------------------------------
GGC-SERVERS 883 ------------------------------------------------- ANY 4 /4 VR-Default
PTP_rt1_msk-rt7_msk 350 ------------------------------------------------- ANY 2 /2 VR-Default
rt1_msk-sw120_msk_MPLS 383 10.10.13.194 /30 -f-------o-----------l------- ANY 1 /1 VR-Default
rt6-msk-rt1-msk_v160 102 ------------------------------------------------- ANY 1 /2 VR-Default
-----------------------------------------------------------------------------------------------
Flags : (B) BFD Enabled, (c) 802.1ad customer VLAN, (C) EAPS Control VLAN,
(d) Dynamically created VLAN, (D) VLAN Admin Disabled,
(e) CES Configured, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(F) Learning Disabled, (h) TRILL Enabled, (i) ISIS Enabled,
(I) Inter-Switch Connection VLAN for MLAG, (k) PTP Configured,
(l) MPLS Enabled, (L) Loopback Enabled, (m) IPmc Forwarding Enabled,
(M) Translation Member VLAN or Subscriber VLAN, (n) IP Multinetting Enabled,
(N) Network Login VLAN, (o) OSPF Enabled, (O) Flooding Disabled,
(p) PIM Enabled, (P) EAPS protected VLAN, (r) RIP Enabled,
(R) Sub-VLAN IP Range Configured, (s) Sub-VLAN, (S) Super-VLAN,
(t) Translation VLAN or Network VLAN, (T) Member of STP Domain,
(v) VRRP Enabled, (V) VPLS Enabled, (W) VPWS Enabled, (Z) OpenFlow Enabled
Total number of VLAN(s) : 8 (4 displayed)
* sw120.6 # show vlan tag 883
VLAN Interface with name GGC-SERVERS created by user
Admin State: Enabled Tagging: 802.1Q Tag 883
Description: None
Virtual router: VR-Default
IPv4 Forwarding: Disabled
IPv4 MC Forwarding: Disabled
IPv6 Forwarding: Disabled
IPv6 MC Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
OpenFlow: Disabled
TRILL: Disabled
QosProfile: None configured
Egress Rate Limit Designated Port: None configured
Flood Rate Limit QosProfile: None configured
Ports: 4. (Number of active ports=4)
Untag: *1(GGC-SERVERS),*2(GGC-SERVERS),*3(GGC-SERVERS)
Tag: !*46g
Flags: (*) Active, (!) Disabled, (g) Load Sharing port
(b) Port blocked on the vlan, (m) Mac-Based port
(a) Egress traffic allowed for NetLogin
(u) Egress traffic unallowed for NetLogin
(t) Translate VLAN tag for Private-VLAN
(s) Private-VLAN System Port, (L) Loopback port
(x) VMAN Tag Translated port
(G) Multi-switch LAG Group port
(H) Dynamically added by MVRP
(D) TRILL Designated, (A) TRILL Appointed Forwarder
(I) Dynamically added by IDM
(U) Dynamically added uplink port
(V) Dynamically added by VM Tracking
Where the master-port changet we see trouble with "(!) Disabled"
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-17-2015 10:05 AM
I didn't understand your first question
see debug output
# debug vlan show vpifs "PTP_rt1_msk-rt7_msk" 46
Process: vlan --- Printing all vpif Start ********************
Total no of vpifs in the system: 11
VLAN: Mgmt, port:1:49, vlanId:4095, instance: 50000001, tag: 0,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:MGMT linkState:0 phyLinkState:0]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x0
VLAN: GGC-SERVERS, port:1:46, vlanId:883, instance: 50000455, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: GGC-SERVERS, port:1:1, vlanId:883, instance: 50000456, tag: 0,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:SLOTPORT linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: GGC-SERVERS, port:1:2, vlanId:883, instance: 50000457, tag: 0,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:SLOTPORT linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: GGC-SERVERS, port:1:3, vlanId:883, instance: 50000458, tag: 0,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:SLOTPORT linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: rt1_msk-sw120_msk_MPLS, port:1:46, vlanId:383, instance: 50000459, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: rt6-msk-rt1-msk_v160, port:1:46, vlanId:102, instance: 50000460, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: rt6-msk-rt1-msk_v160, port:1:47, vlanId:102, instance: 50000461, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:0 phyLinkState:0]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: sw120_msk-rt3_msk_MPLS, port:1:42, vlanId:367, instance: 50000462, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: PTP_rt1_msk-rt7_msk, port:1:46, vlanId:350, instance: 50000463, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: PTP_rt1_msk-rt7_msk, port:1:39, vlanId:350, instance: 50000464, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
Egress and Ingres state bit definitions
typedef enum ifIngressState_ {
IF_STATE_ENABLE_LEARNING= 0x1,
IF_STATE_DISABLE_LEARNING = 0x2,
IF_STATE_ALLOW_ALL = 0x4,
IF_STATE_ALLOW_AUTH_MAC = 0x8,
IF_STATE_SLOWPATH_PROCESSING = 0x10,
IF_STATE_IN_BLOCK_ALL = 0x20,
IF_STATE_IN_BLOCK_DATA = 0x40,
IF_STATE_INVALID = 0xffffffff,
} ifIngressState_t;
typedef enum ifEgressState_ {
IF_STATE_FORWARDING = 0x1,
IF_STATE_EG_BLOCK_ALL = 0x2,
IF_STATE_BLOCK_FLOODING = 0x4,
IF_STATE_EG_BLOCK_DATA = 0x8,
IF_STATE_BLOCK_BROAD_CAST = 0x10,
} ifEgressState_t;
Layer 2 protocols , ids and their priorities(lower values have higher precedence
Protocol: SRP , ID: 0x1, Priority: 8001
Protocol: netLogin , ID: 0x2, Priority: 10001
Protocol: VRRP , ID: 0x4, Priority: 40001
Protocol: ESRP , ID: 0x8, Priority: 30001
Protocol: ELSM , ID: 0x10, Priority: 7001
Protocol: ETHOAM , ID: 0x20, Priority: 6001
Protocol: ERPS , ID: 0x40, Priority: 10050
Protocol: stp , ID: 0x80, Priority: 9001
Protocol: brm , ID: 0x100, Priority: 50001
Protocol: FIP , ID: 0x200, Priority: 60001
Protocol: EAPS , ID: 0x400, Priority: 20001
gMacArray[0]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[1]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[2]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[3]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[4]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[5]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[6]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[7]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
see debug output
# debug vlan show vpifs "PTP_rt1_msk-rt7_msk" 46
Process: vlan --- Printing all vpif Start ********************
Total no of vpifs in the system: 11
VLAN: Mgmt, port:1:49, vlanId:4095, instance: 50000001, tag: 0,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:MGMT linkState:0 phyLinkState:0]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x0
VLAN: GGC-SERVERS, port:1:46, vlanId:883, instance: 50000455, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: GGC-SERVERS, port:1:1, vlanId:883, instance: 50000456, tag: 0,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:SLOTPORT linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: GGC-SERVERS, port:1:2, vlanId:883, instance: 50000457, tag: 0,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:SLOTPORT linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: GGC-SERVERS, port:1:3, vlanId:883, instance: 50000458, tag: 0,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:SLOTPORT linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: rt1_msk-sw120_msk_MPLS, port:1:46, vlanId:383, instance: 50000459, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: rt6-msk-rt1-msk_v160, port:1:46, vlanId:102, instance: 50000460, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: rt6-msk-rt1-msk_v160, port:1:47, vlanId:102, instance: 50000461, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:0 phyLinkState:0]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: sw120_msk-rt3_msk_MPLS, port:1:42, vlanId:367, instance: 50000462, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: PTP_rt1_msk-rt7_msk, port:1:46, vlanId:350, instance: 50000463, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
VLAN: PTP_rt1_msk-rt7_msk, port:1:39, vlanId:350, instance: 50000464, tag: 1,
Ingress:0x5, Egress: 0x1, l2 prot priority: 0, cfgSave: TRUE
l2Protos (IDs): 0x0 [PIF: type:TRUNK linkState:1 phyLinkState:1]
uRPF[-]:0, isTrillAppointedForwarder:0 isTrillDesignated:0
clientUsage: 0x10
Egress and Ingres state bit definitions
typedef enum ifIngressState_ {
IF_STATE_ENABLE_LEARNING= 0x1,
IF_STATE_DISABLE_LEARNING = 0x2,
IF_STATE_ALLOW_ALL = 0x4,
IF_STATE_ALLOW_AUTH_MAC = 0x8,
IF_STATE_SLOWPATH_PROCESSING = 0x10,
IF_STATE_IN_BLOCK_ALL = 0x20,
IF_STATE_IN_BLOCK_DATA = 0x40,
IF_STATE_INVALID = 0xffffffff,
} ifIngressState_t;
typedef enum ifEgressState_ {
IF_STATE_FORWARDING = 0x1,
IF_STATE_EG_BLOCK_ALL = 0x2,
IF_STATE_BLOCK_FLOODING = 0x4,
IF_STATE_EG_BLOCK_DATA = 0x8,
IF_STATE_BLOCK_BROAD_CAST = 0x10,
} ifEgressState_t;
Layer 2 protocols , ids and their priorities(lower values have higher precedence
Protocol: SRP , ID: 0x1, Priority: 8001
Protocol: netLogin , ID: 0x2, Priority: 10001
Protocol: VRRP , ID: 0x4, Priority: 40001
Protocol: ESRP , ID: 0x8, Priority: 30001
Protocol: ELSM , ID: 0x10, Priority: 7001
Protocol: ETHOAM , ID: 0x20, Priority: 6001
Protocol: ERPS , ID: 0x40, Priority: 10050
Protocol: stp , ID: 0x80, Priority: 9001
Protocol: brm , ID: 0x100, Priority: 50001
Protocol: FIP , ID: 0x200, Priority: 60001
Protocol: EAPS , ID: 0x400, Priority: 20001
gMacArray[0]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[1]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[2]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[3]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[4]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[5]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[6]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
gMacArray[7]: cnt:0 Addr 0.0.0.0.0.0 src: 0 in_use: 0
