virtual exos 26.1.4 - Tagged traffic not working
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-25-2018 11:24 AM
Hi all,
Has anybody successfully got the virtual exos 26.1.4 working with tagged traffic on ESXi? Spent ages thinking it was the VM environment but it does not appear to be.
Simple test scenario:
create vlan test
config vlan test ipaddress 10.1.2.10/24
config vlan test add ports 1 tagged
create vlan test
config vlan test ipaddress 10.1.2.11/24
config vlan test add ports 1 tagged
Try and ping between them, and absolutely nothing.
ESXI Portgroup promiscious mode with vlan 4095 (all VLANS) with the virtual adapters configured as E1000.
EXOS version 22.2.15 and 16.2.1.6 works absolutely fine. Will probably try 22.5 next.
So either looks like a bug, or I'm missing something new in the latest and greatest.
Oh ESXi version 6.7.
Has anybody successfully got the virtual exos 26.1.4 working with tagged traffic on ESXi? Spent ages thinking it was the VM environment but it does not appear to be.
Simple test scenario:
create vlan test
config vlan test ipaddress 10.1.2.10/24
config vlan test add ports 1 tagged
create vlan test
config vlan test ipaddress 10.1.2.11/24
config vlan test add ports 1 tagged
Try and ping between them, and absolutely nothing.
ESXI Portgroup promiscious mode with vlan 4095 (all VLANS) with the virtual adapters configured as E1000.
EXOS version 22.2.15 and 16.2.1.6 works absolutely fine. Will probably try 22.5 next.
So either looks like a bug, or I'm missing something new in the latest and greatest.
Oh ESXi version 6.7.
13 REPLIES 13
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-25-2018 12:28 PM
Yup got that too, i just can't edit my first post annoying.
Using tag 100.
Using tag 100.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-25-2018 12:28 PM
You should define a tag number when creating a vlan which will be used not only inside one switch create vlan test tag 22
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-25-2018 12:24 PM
Sorry will clarify; the two configs are for different switches.
So 10.1.2.10 for Switch1, 10.1.2.11 for Switch2.
I am testing simply communication between two switches via tagged ports. Untagged ports not a problem.
Ports are showing as enabled and active.
Verified not working; 22.6, 22.5,22.4.
Working: 22.3 and below.
Switch setup is purely default with the VLAN config as stated above.
So 10.1.2.10 for Switch1, 10.1.2.11 for Switch2.
I am testing simply communication between two switches via tagged ports. Untagged ports not a problem.
Ports are showing as enabled and active.
Verified not working; 22.6, 22.5,22.4.
Working: 22.3 and below.
Switch setup is purely default with the VLAN config as stated above.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-25-2018 12:11 PM
You should create two different vlans, e.g test1 and test2
