what is the command to enable the web browser connection to a switch?

[Bernard_Morel]

I have one switch that I'm able to connect to web browser and others that I can't.

I'm looking for the command that should run in the others switch to enable the Browser connection.

Thanks

[StephenW]

enable web http

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-the-web-interface/

[Drew_C]

Found the issue... per the release notes:
Enabling HTTP on a Non-SSH ExtremeWare 7.4 or Later Image
In ExtremeWare 7.3, the CLI command syntax used to enable HTTP is

code:

enable web http

even when upgrading a non-ssh image. In ExtremeWare 7.4, the

code:

enable web

command is used with the option

code:

http

/

code:

https

. This command option is only available with the ssh image. Therefore, when upgrading an ExtremeWare 7.3 non-ssh configuration to an ExtremeWare 7.4 non-ssh configuration, the

code:

enable web http

command will fail.

Let's get your switch upgraded and SSH capable. Here's the SSH Image Request Form for ExtremeWare 7.8.4-patch1-4 (the latest available).
https://extrwebapps.extremenetworks.com/WebApps/Public/ExportControl/?swID=112
The file you want from the download is

code:

v784b1-patch1-4.SFxtr

I went ahead and gathered the Release Notes for you too: http://tech.extremenetworks.com/ftp/ftp_new.aspx?file=ExtremeWare 7.8.4b1-patch1-4_RelNote.pdf
Let me know if you need anything else!

[Drew_C]

That switch and version should support this feature. Since the S200 is End-of-Life, I don't have one readily available to test with in our lab.
Let me see if I can get one online again to confirm.

[Bernard_Morel]

System Serial Number: 800105-00-07 0447G-02101 CP:04
Image : Extremeware Version 7.8e.4.1 [non-ssh] by Build_Master on 03/18/11 04:1
1:31

BootROM : 5.1

[Drew_C]

Hi Bernard,
It looks like the

code:

enable web http

command for ExtremeWare devices was added for the Summit e series in v7.3. What version are you running on the S200-24?