Hi Deepak,
It should work if you are using the Default VLAN in your Network, otherwise you should Tag flow for each vlan on trunk port.
use below commands:
configure vlan Default add ports all
assign ip address for remote https access:
configure vlan Default ipaddress 10.3.10.2 255.255.255.0
and:
enable ssh2
create user/password:
configure account admin password
save config:
save
Thank you
------------------------------
Best Regards
Muhammad Nadeem khan
Sr. Network Engineer
Mobile No: 0313-999-4838
Azoure Engineering & Services
------------------------------
