2016-02-29: New GTAC Knowledge Articles February 21 - February 27, 2016

[Ken_Thomas]

Here are the new articles that were published February 21 - February 27, 2016 in GTAC Knowledge:

Sunday, February 21, 2016:
NAC Captive portal not redirecting to configured URL

Monday, February 22, 2016:
X440 Stack dual mastership
Problem on vlan/vman after removing port from vman
Network connectivty issues after LAG member port disabled between Securestack switches
EOS - Enabling loop protect caused uplink port to stop forwarding traffic
How to recover a D2 when locked out of admin account over time
How do I find the maximum amount of flows my Purview/Analytics system supports?
Will a 'Series 1" option module work in a 140/180-Class S-Series I/O Module or Fabric Module?
S-Series Route-Map to Redirect Traffic to Next Hop based on ToS Value Failing
Identifi Wireless v8 Domain Licensing is no longer Available on the Extranet
What are firewall considerations when installing NetSight on Window OS?
Is it possible to change the port number for SNMP trap (UDP 162) on NetSight?
X460-G2 10G port will not establish a connection with the Cisco 4402 wireless controller

Tuesday, February 23, 2016:
Stack ports will not link up when configuring stacking-support between a VIM4-40G4x-and-V80-module
Registering a Warranty for an Extreme Networks product
Can NAC limit the number of concurrent sessions per user
EXOS Firmware Download Failed in Ridgeline
Observing Kernel Error message on X460G2 with VIM-2Q causing "Bad Checksum lane" error during boot u...
i2C-1 EEPROM related error message "Transceiver is not present on this port"
EXOS | Unable to delete port from vlan after deleting fdbentry when lock-learning is enabled
EXOS Error: ACL install operation failed - filter hardware full for vlan *, port 48

Wednesday, February 24, 2016:
Ubiquiti UniFi UAP-AC-Lite and UAP-AC-LR will not power up when plugged into PoE switch
How To Download an Image to a EXOS stack Using IPv6?
RADIUS Authorization not working due to Windows Active Directory account restrictions
Telnet connection problem: Exceeded task timeout of 10000ms waiting for prompt
S-Series: Blade resets with error - <0>Dune[3.dTcmTask]FE600 2 detects unrecoverable errors (0x00000...
Strange larger numerical output in csv export of IdentiFi Guest Accounts
Inventory Manager configuration backup fails with a 'SNMP Error = No Access ' message
NAC removing end systems from static groups
S-Series error when trying to configure tunnel (GRE / VxLAN): No tunnel license configured.

Thursday, February 25, 2016:
Ten Gig Port Showing Low Alarm in Command show Port transceiver tg.x.y
What PoE standards are needed to power up the AP39xx?
What do the values mean in a 'show node'?
enable stacking-support command does not exist for X450-G2
Redeemed an EOS-based License but cannot Locate the needed Activation Key
Which C5-Series SecureStack has 10GB SFP+ Support?
Where do I find the power cord specifications for EXOS switches?
Why do I see pibAddPortCPUFilter messages in the EXOS switch logs?
How do I configure EXOS switches for LLDP

Friday, February 26, 2016:
S-Series blade showing as unknown or in a boot loop with red CPU LED - Errors in console: Retransmis...
Cannot Add Another Physical Interface Mapping to Wireless Controller

Saturday, February 27, 2016:
How to prevent topology change impact on routed vlans

[Curtis_Parish1]

That is good but the article itself is still incorrect. A Type 1 card can be used in a 140/180 class blade.

See page 1-1

https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=fc5c20d1-746f-432e-bb95-12cde...

[Ken_Thomas]

Thanks Curtis, I will ask one of the gtac engineers to review your feedback on this article

[Curtis_Parish1]

Referring to
Will a 'Series 1" option module work in a 140/180-Class S-Series I/O Module or Fabric Module?

Never heard of cards referred to as Series 1 and Series 2. They are normally referred to as Type 1 and Type 2 A Type 1 card can be installed in a 140/180 class blade.

See page 1-1

https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=fc5c20d1-746f-432e-bb95-12cde...

[Ryan_Mathews]

Thanks for feedback Curtis. Appreciate you helping us improve this article.