How to login into extreme summit x440-24t switch?

[venkatesh_siddi]

Hello Everyone.I have a summit exreme switch x440-24t i need to login the console,and i dont have serial cable with me can somebody give me the steps to login into it by providing default gateway and the connections.Thanks in advance.

[Erik_Auerswald]

Hi,

please look at the following GTAC Knwoledge articles. The first describes how to use the serial console, the second how to use the Ethernet management port:

• How to console into Extreme Networks switches
• How to configure an IP address on the management interface of an EXOS switch

Erik

[venkatesh_siddi]

Hello Everyone,i wasn't able to login the console,what i did is i connected serial cable and installed putty and configured the ipaddress 192.168.10.x and the same ip given in putty and putty opened but it is not showing anything.can somebody help me please.

[Tripathy__Priya]

I could see above some of very useful articles have been provided already by my colleagues. Adding to them please find below article says about:

How to configure putty terminal-emulation software to access the local console of Extreme Switches?

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-putty-terminal-emulation-...

Hope all these will help you to crack your very concern.

[venkatesh_siddi]

Hi Vellachery, Can i connect with RJ45 cable switch to laptop by using third party software tool.Thanks in advance.