Greetings. I have a chassis S6 that should give for 70 DHCP address pools with mask (/ 25 and / 24). Each pool has a corresponding VLAN (30,31,32 ...). For example: VLAN 1 - 10.17.3.231/24 (ip address for switch.) VLAN 30 - ip 10.17.30.1/25 ip v30 pool 10.17.30.0/25 VLAN 31 - ip 10.17.30.129/25 ip v31 pool 10.17.30.128/25 . . . ip address for Internet firewall 10.17.3.254/24 Having created a number of DHCP pools, sends me an error and I can no longer create more pools. Also, what would be the best way to make a "ip route" that VLANs allows the ip firewall Internet (10.17.3.254/24)? enable ip forwarding it´s ok. Note: The firmware version I have is 07.22.02.001 What can I do in this situation?, thank you very much.
