ExtremeSwitching (VSP/Fabric Engine) - Page 74 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

GNS3 VOSS 8.3 - Write mem / Save config

Curious If anyone else is having this exact issue using VOSS 8.3 in GNS3, write mem, save config will not save a valid config file, If you reboot the virtual appliance it boots up in a defaulted state. The following fixes the issue and allows you to ...

Resolved! S-Tag over VOSS Fabric using VSP 7400 Switches

Hi All TLDR: We cannot get S-Tag vlans to pass over the Fabric between our two VSP 7400 switches. We have the following deployed in our network; 2 x Extreme VSP 7400 Software version 8.0.5.1These are joined by two 100Gb cables.ISIS is enabledISIS Spb...

Resolved! VSP 5520 QSFP

Hoping someone can confirm or clarify the uses for the 2 QSFP28 ports on the front of the VSP5520 switches. From what I’m reading, those ports are basically unusable when using VOSS in fabric mode.

Resolved! Interface spanning tree change confirmation ?

Apologies if this a stupid question. I am changing the config on some of the ports on our core VSP switches and I think I have this right but I would like some confirmation if someone could help? Current port config :-spanning-tree mstp edge-port tru...

Resolved! Push 475 vlan over SPBM vlan 4052 only but not vlan 4051

HII need to configure one 475 vlan to go over SPBM vlan 4052 but not on 4051 if it possible. We are running VOSS 8.3.0Tanks Justas K.

Top Kudoed Authors

User

Count

37

21

21

18

8

GTM-P2G8KFN