04-15-2025 07:52 AM - edited 04-15-2025 08:31 AM
Hello,
need to assign a vlan based on the name of a existing vlan on a VOSS/FabricEngine switch to a client. What are the correct VSA?
04-20-2025 11:13 PM - edited 04-21-2025 09:50 PM
Hello!
To assign a VLAN by name on a VOSS/FabricEngine switch via RADIUS, you primarily need the VLAN ID, not the name. Use the standard RADIUS attributes Tunnel-Type=VLAN, Tunnel-Medium-Type=IEEE-802, and Tunnel-Private-Group-ID=<VLAN_ID>. First, map the VLAN name to its corresponding VLAN ID on the switch and configure your RADIUS server Toll By Plate with this ID. For Fabric Attach scenarios, the FA-VLAN-ISID VSA might be relevant using the I-SID associated with the VLAN. The standard approach relies on VLAN IDs in the RADIUS configuration.
04-21-2025 06:41 AM
Hello,
To my understanding, when vlan id. and name are locally configured on the switch, it is possible to use only the vlan name attribute.
regards
WillyHe
04-21-2025 05:59 AM
Hello! I'm recieving the following output. r
EAP WARNING Ignore the radius vlan attribute on Flex UNI port 1/1 with auto-isid-offset disabled.