VRRP priority

[Alok_Shukla]

I have configured MLAG(X670) on two switch and want to configure VRRP active-active can we use same priority level on both switches?

[AnonymousM]

Stephane is right. With the introduction of fabric routing we have an easier approach. The ACL was the way to do it before we had fabric routing. Anyway, both ways work.

[Bin]

Hi,

There is one good article which could help you to configure fabric routing.

https://gtacknowledge.extremenetworks.com/articles/How_To/An-example-of-VRRP-fabric-routing-configur...

Best regards,
Bin

[Alok_Shukla]

thank's Hagemann

[Stephane_Grosj1]

Fabric Routing is a simpler approach, imho. During the VRRP config, this is an option you can turn on.

configure vrrp {vlan vlan_name vr vr_id | all} fabric-routing [on | off]

User Guide:
https://documentation.extremenetworks.com/exos_22.4/EXOS_21_1/VRRP/c_vrrp-fabric-routing-overview.sh...

Command Guide:
https://documentation.extremenetworks.com/exos_commands_22.4/exos_21_1/exos_commands_all/r_configure...