VRRP priority

[Alok_Shukla]

I have configured MLAG(X670) on two switch and want to configure VRRP active-active can we use same priority level on both switches?

[AnonymousM]

VRRPActive.pol

entry denyVrrpCtrl {

if match all {

destination-address 224.0.0.18/32;

} then {

deny; } }

[AnonymousM]

Just giving them the same priority does not give you active-active. When two VRRP routers have the same priority the one with the higher MAC wins. So only one of them will become master. You have to block the VRRP hellos via an ACL on the ISC link.