AP410C channel transmission 5GHz

[daniel_rohleder]

Hello,

can an AP410C (AP410C-1-WR) Dual 5GHz. So simultaneously broadcast 2 Channels in the 5GHz Range?

So switch off the 2,4GHz Range and transmit 2 Channels in the 5GHz(Channel width 40Mhz) Range. (Example Channel 38 & 102)

[Jan_Reister]

Yes. On an XIQ-Controller I use a new device profile where the Radio1 is a/n/ac/ax. 

The catch here is that there must be enough frequency distance between the Radio1 and Radio2 (SmartRf does this automatically) and small (20Mhz) channels are better than large (80Mhz) because of spectral growth sideband emissions.

Dual 5Ghz is a great feature for capacity when you would not have used the 2.4 radio anyway.

[Ash_Finch]

Yes, changing the WiFi0 interface to 5GHz will allow you to transmit on 2x 5Ghz channels at once, as per your example.

[Karl_Heinz_Goll]

Dual channel in the 5 GHz band means to transmit two different channels in the 5 GHz band and switch off the 2.4 GHz band