Extreme Wireless Access Point to other SIEM

[ronald_vitug]

Is there  a way to forward Extrem Wireless Access point to thrid party SIEM 

[nguyen89]

Hello @ronald.vitug,

I would suggest that you configure a "untagged" port (Access port) in vlan 60 first and connect a laptop to this port to see if you receive a IP address.

If you do not receive a IP address, provision your laptop with a static IP in the 10.100.60.x range and see if you can ping the IP interface on the controller.

The problem might be with your DHCP server, or with the vlan not being tagged in your network infrastructure.

One thing to note is that the 3rd Party interface acts like a router, so for your DHCP server to be able to reach this subnet you will need to add some myloweslife route to get to the 10.100.60.x network, route to the wireless controller.

[Miguel-Angel_RO · Accepted solution]

Here the answers:

https://extremeportal.force.com/ExtrArticleDetail?an=000090398

https://extremeportal.force.com/ExtrArticleDetail?an=000079670

Mig

[ronald_vitug]

If there a way that we can forward   Extreme Wireless Access Point log to any third party SIEM tools like  FortiSIEM?

[Miguel-Angel_RO]

Ronald,

There is something missing in your question. Could you please elaborate a little bit?

Mig