Moving from Identify C5215 controller to new CloudIQ Controller E3120

[akannemeyer]

Hi Extreme Community.

We are in the process of migrating a client from the legacy Identify Controller to the new CloudIQ Controller.

On the old Identify we had the option of creating a SSID with a topology that is routed at the controller.

On the new CloudIQ Controller we do not have the option for a routed network, only: Brige@AP, Bridge@AC, VXLAN or Fabric Attach.

The SSID that I need to create must be routed via the controller.

Can you configure a routed topology on the new controllers?

Regards

[Gareth_Mitchell]

Hi

Routed topologies are not supported by the XIQ-C controller.

-Gareth

[LouisNHS]

We had the same requirements and were sold a VGVA virtual appliance which we have created a L2 tunnel for segregating guest traffic from our LAN.