cancel
Showing results for 
Search instead for 
Did you mean: 

Moving from Identify C5215 controller to new CloudIQ Controller E3120

Moving from Identify C5215 controller to new CloudIQ Controller E3120

akannemeyer
New Contributor

Hi Extreme Community.

We are in the process of migrating a client from the legacy Identify Controller to the new CloudIQ Controller.

On the old Identify we had the option of creating a SSID with a topology that is routed at the controller.

akannemeyer_0-1673872524712.png

On the new CloudIQ Controller we do not have the option for a routed network, only: Brige@AP, Bridge@AC, VXLAN or Fabric Attach.

 

The SSID that I need to create must be routed via the controller.

Can you configure a routed topology on the new controllers?

Regards

2 REPLIES 2

Gareth_Mitchell
Extreme Employee

Hi

Routed topologies are not supported by the XIQ-C controller.

-Gareth

LouisNHS
New Contributor II

We had the same requirements and were sold a VGVA virtual appliance which we have created a L2 tunnel for segregating guest traffic from our LAN.

GTM-P2G8KFN