cancel
Showing results for 
Search instead for 
Did you mean: 

Access Point Grouping

Access Point Grouping

Thomas_Maddox
New Contributor
I have 25 buildings in my school district and a total of 556 AP's throughout. They are a mixture of 2610;s, 3610's and 3805's. The 2610's are being controlled by a pair of 4210's running 8.11.09.004 firmware and the others are on 5210 controllers running 9.21.07.0007 firmware. I would like to group the AP's according to the building locations in order to do a Bandwidth by AP group report. Is this possible?
1 REPLY 1

Zdeněk_Pala
Extreme Employee
Hi,

AFAIK you can do it with our management platform = NMS = NetSight = ControlCenter (just choose the name you wish to use).

You can start Console and then Wireless Manager. you need SNMP and CLI(SSH) access to the controller.

good luck

Zdenek
Regards Zdeněk Pala
GTM-P2G8KFN