cancel
Showing results for 
Search instead for 
Did you mean: 

configuring ipv6 in identifi wireless

configuring ipv6 in identifi wireless

Nagaraj_Kukke
New Contributor
We are the extreme partner one of our existing customer have extreme wireless setup and they have requirement of ipv6 enable wifi with extreme identifi wireless controller, please help me to enable the feature and steps if available.
9 REPLIES 9

Doug
Extreme Employee
Correct, B@AP for Client Traffic....
Doug Hyde
Director, Technical Support / Extreme Networks

Hi.. with new version 10.. IPV6 only bridged at AP???

Doug
Extreme Employee
If you bridge the wireless traffic at the ap only ipv6 will pass through. It is not supported with any other topology type (bridge at controller/routed "tunneled").
See also: https://community.extremenetworks.com/extreme/topics/wireless_controller_support_ipv6
Doug Hyde
Director, Technical Support / Extreme Networks

Hi,

Do you mean if we bridge we can achieve the IPV6 if tunnel to controller what is the result.

Doug
Extreme Employee
Also for more information on how to create a wlan-service please refer to the IdentiFi Wireless User Guide - https://extranet.extremenetworks.com/downloads/Pages/dms.ashx?download=c2513a5a-1186-4e25-ae97-dc9e1...

Look at the section titled: Configuring WLAN Services

  • You can also follow the menu wizard to create the Bridge at AP Services:
  • Open the Controllers management web interface <>:5825
  • Default log in admin/abc123
  • Click on the VNS tab from the top task menu
  • Click "New" from the left hand side task menu
  • Click START VNS WIZARD and follow the instructions

Doug Hyde
Director, Technical Support / Extreme Networks
GTM-P2G8KFN