cancel
Showing results for 
Search instead for 
Did you mean: 

Quick question regarding the AP3935i model

Quick question regarding the AP3935i model

Rus
New Contributor
Hi everyone, coming from the Cisco world, I've been thrust into the Extreme world due to my new assignment and I'm freaking loving this. I have a quick question regarding the above mentioned AP. To get max throughput, do I need to have both lan ports connected via Cat6?
1 REPLY 1

Gareth_Mitchell
Extreme Employee
Hi Rus

You don't need both ports connecting to bring the AP up, 1 802.1at port is fine (af power works but only with the radio at 2x2)

If you use both links, you need to do LACP lag with the switch, traffic is distributed across the lag as defined here: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-hashing-algorithm-used-to-distribute-load-across-links-on-access-points-with-dual-Ethernet-ports-running-LACP/

-Gareth
GTM-P2G8KFN