cancel
Showing results for 
Search instead for 
Did you mean: 

Third party AP support

Third party AP support

Andre_Brits_Kan
Contributor II
Hi guys

I have configured a physical interface for third party AP's as per the attached screenshot.

I then create the Wlan 3rd party service but am a bit lost as to how this mapps to a outbound topology.

I currently have 2 ISP's connected to esa1 on different vlans.
I would like to map the thrid party AP's traffic to one of the ISP vlans.

With a normal WLAN service I can set the B@HWC topology af default or apply a role that B@HWC.

With the third party WLAN you can not assign a topology.

Any assistance on how the thrid party AP works and how to configure it.

Thx

Andre

3 REPLIES 3

Umut_Aydin
Extreme Employee
Via a third party VNS you can apply access rules/filters to wireless traffic running over a parallel wireless network but our controllers do not manage non-EXTR APs

Doug
Extreme Employee

Andre_Brits_Kan
Contributor II

6c7b69cbfeb64c94ae41b4b95d8a7404_RackMultipart20150611-24196-1eovomm-Capture_inline.jpg


GTM-P2G8KFN