Wifi controller Enterasys identifi C4110-2 - Numbers of clients per access point with SNMP

[Carlos_Castro]

Hi all,

sorry for my English.

I'm having trouble picking up the users connected by access point via SNMP.

Anyone know which OID is responsible for this task in the MIB?

Thank you all

[Carlos_Castro]

Hi Gareth,

This OID did not bring the information I want.

I have an example of what I want in the FortiGate controller, for example:

#snmpwalk -v2c -c comunity IP_controller 1.3.6.1.4.1.12356.101.14.4.3.1.3

SNMPv2-SMI::enterprises.12356.101.14.4.3.1.3.1.16.70.65.80.50.49.66.51.85.49.48.48.48.55.56.56.53 = STRING: "AP1"

SNMPv2-SMI::enterprises.12356.101.14.4.3.1.3.1.16.70.80.50.50.49.66.51.88.49.50.48.48.50.55.57.54 = STRING: "AP2"

#snmpwalk -v2c -c comunity IP_controller 1.3.6.1.4.1.12356.101.14.4.4.1.17

SNMPv2-SMI::enterprises.12356.101.14.4.4.1.17.1.16.70.65.80.50.49.66.51.85.49.48.48.48.55.56.56.53 = Gauge32: 3

SNMPv2-SMI::enterprises.12356.101.14.4.4.1.17.1.16.70.80.50.50.49.66.51.88.49.50.48.48.50.55.57.54 = Gauge32: 0

In the example of FortiGate controller, I have the access point named "AP1" with 3 authenticated users and an access point named "AP2" with 0 authenticated users.

I need this information referring to the number of authenticated users in each access point for the controller enterasys.

Tranks

[Gareth_Mitchell]

Hi Carlos

Take a look in the muEntry table @ 1.3.6.1.4.1.4329.15.3.6.2.1

Is this what you are looking for?

-Gareth