08-24-2018 05:56 AM
We found the following https://extremeportal.force.com/ExtrArticleDetail?an=000087305 which states that ADDBA support and Aggregate MPDU should be disabled.
We are using AP3915i and V10.41 Firmware and the default setting is ADDBA support and Aggregate MPDU enabled. However, the knowledge base article above states to disable it.
Is this (disable that) because of the following (resolved) problem: https://extremeportal.force.com/ExtrArticleDetail?an=000075743
Currently, we do not have any problem but should we disable these two options or not?
By the way we had problems (audio spikes) with WL3 (a flavor of Ascom i62) configured with g/n and 11n protection mode beeing "Auto". According to https://extremeportal.force.com/ExtrArticleDetail?an=000075084 11n protection mode should be None, and sure enough the problems disappeared (we also had the mentioned AP log entries "WAL_DBGID_DEV_TX_TIMEOUT"). What does the 11n protection mode do?
09-05-2018 05:32 PM
09-05-2018 03:54 AM
09-04-2018 02:18 PM
09-04-2018 02:09 PM