AP 230 lights

[TomK]

I did a reset on all 6 AP230 boxes. 4 turned white then dark for the 4 second pulse every minute. 2 LED lights stayed white. Is that an error or issue?

[StephanH]

Hello Tom,

the APs are cloud APs, so first the question, do you have a cloud account and set up the APs there accordingly?
Only then can the APs work. You should do that first.

Here is a link that describes the LEDs. But as written, first connect to the cloud and then check the status of the LEDs.

Q A: Former Aerohive AP LED indicator patterns explained | Extreme Portal

Force		remove preview
Q A: Former Aerohive AP LED indicator patterns explained | Extreme Portal 1. AP110 and AP120 Dark: There is no power or the status indicator is disabled. Blue (steady): The device is booting up or there is no backhaul link; (flashing) the device is shutting down. Green: The default route is through the backhaul Ethernet interface, but not all conditions for normal operations (white) have been met. View this on Force >