OS version 10.4.3
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-22-2021 09:29 AM
I updated 2 APs on Monday and all seemed great and those 2 are still great. I updated 4 more yesterday and on 1 it shows this in the event log and nobody was able to connect to it until I rebooted it. I do not have the channel set to auto. It is set to channel 128. What exactly do these message mean if anyone knows? Updating the OS is the only change that was made. I don't see these events happening on the others so for now I'm treating it as an isolated event but I'm now going to be watching for it again before opening a trouble ticket.
|
2021-12-21 23:02:34
|
INFO |
State Change
|
The access interface wifi1.1 is down.
|
|
2021-12-21 23:02:34
|
INFO |
State Change
|
The access interface wifi1.1 is up.
|
|
2021-12-21 23:02:34
|
INFO |
Channel Power Change
|
One or more parameters for the access radio wifi1 changed. Its current channel is <128*>, Tx power is <20> dB, beacon interval is <100> TU, and EIRP is <29.77> dBm, reason: 2.
|
|
2021-12-21 23:02:34
|
INFO |
Channel Power Change
|
One or more parameters for the access radio wifi1 changed. Its current channel is <128*>, Tx power is <ACSP> dB, beacon interval is <100> TU, and EIRP is <29.77> dBm, reason: 3.
|
|
2021-12-21 22:31:32
|
INFO |
Channel Power Change
|
One or more parameters for the access radio wifi1 changed. Its current channel is <165>, Tx power is <20> dB, beacon interval is <100> TU, and EIRP is <29.77> dBm, reason: 3.
|
|
2021-12-21 22:31:27
|
INFO |
Channel Power Change
|
One or more parameters for the access radio wifi1 changed. Its current channel is <165>, Tx power is <20> dB, beacon interval is <100> TU, and EIRP is <29.77> dBm, reason: 4.
|
|
2021-12-21 22:31:27
|
INFO |
Channel Power Change
|
One or more parameters for the
|
0 REPLIES 0
