Hi
I have a problem with updating the firmware on AP3935
The software is downloaded via TFT. Then a message pops up to check flash and a few others.
Has anyone had a similar problem?
image_upgrade AP3935-10.41.01.0080.img 10.2.2.6
TFTP AP3935-10.41.01.0080.img from 10.2.2.6 in process...
TFTP done.
core enabled
thinSupport=1 thickSupport=2 AP_MODE=0
22+0 records in
22+0 records out
8+0 records in
8+0 records out
86723+0 records in
86723+0 records out
Flash - check available space and clean if required
Kernel image upgrading, replacing secondary image
19018+1 records in
19018+1 records out
Kernel image upgraded.
Image upgrade done.
No core files while upgrading
/usr/sbin/image_upgrade2: Clean up and exit with return value 0
