802.11ac only
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-24-2017 06:28 PM
How do I make the Access Point only support 802.11ac or 802.11n. Is there a way to only support certain protocols without allowing things like 802.11a and 802.11b?
The only thing I see if what I provide. I don't see an "n-only" or an "n and ac" selection.
ap7532-85ACFC(XXX)#data-rates 5GHz
a-only an default custom
ap7532-85ACFC(XXX)#data-rates 2.4GHz
b-only bg bgn default g-only gn custom
The only thing I see if what I provide. I don't see an "n-only" or an "n and ac" selection.
ap7532-85ACFC(XXX)#data-rates 5GHz
a-only an default custom
ap7532-85ACFC(XXX)#data-rates 2.4GHz
b-only bg bgn default g-only gn custom
12 REPLIES 12
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-25-2017 05:56 AM
You will use it for a bridge or mesh? The mesh link select the best rate. Just disable the low basic rates. This are used for broadcast and multicast.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-25-2017 05:53 AM
I Thought that AC would be better for use in a wifi bridge,
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-25-2017 03:30 AM
Based on the wireless standards it's not possible to disable 802.11g or 802.11a data rates. You still need this basic rates. 802.11n and 802.11ac are no possible basic rates.
Why you would disable the 802.11g data rates?
Why you would disable the 802.11g data rates?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-24-2017 08:03 PM
You mean you only want MCS rates? I wouldn't recommend that. Not all clients like connecting using MCS rates. You will need some of the basic OFDM rates.
So - choose custom rates and choose what you need. This is not protocol issue. Protocol defines higher rates but for the most part in real world with variety of clients - you need to choose your rates based on your deployement, AP spread and overlap and clients that you have.
So - choose custom rates and choose what you need. This is not protocol issue. Protocol defines higher rates but for the most part in real world with variety of clients - you need to choose your rates based on your deployement, AP spread and overlap and clients that you have.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎08-24-2017 07:14 PM
Right, but the problem is I cannot just support 802.11n and AC. I have to support more than that.
MCS-4s is 802.11a/g and only part of 802.11ac. How would I just support all of 802.11n and AC?
MSC0-7 is everything. I am not clear how do just support the protocol that I want. Looking at that chart, I have the same question. So is the answer that I cannot support just 802.11n and AC. I have to support more than this?
ap7532-15E560(config-device-84-24-8D-15-E5-60-if-radio1)#data-rates
a-only an b-only bg bgn custom default g-only
gn mcs
ap7532-15E560(config-device-84-24-8D-15-E5-60-if-radio1)#data-rates custom
1 11 12 18 2
24 36 48 5.5 54
6 9 basic-1 basic-11 basic-12
basic-18 basic-2 basic-24 basic-36 basic-48
basic-5.5 basic-54 basic-6 basic-9 basic-mcs0-7
mcs-1s mcs-2s mcs-3s mcs-4s mcs0-15
mcs0-23 mcs0-31 mcs0-7 mcs16-23 mcs16-31
mcs24-31 mcs8-15 mcs8-23 mcs8-31 basic-mcs-1s
ap7532-15E560(config-device-84-24-8D-15-E5-60-if-radio1)#data-rates custom
MCS-4s is 802.11a/g and only part of 802.11ac. How would I just support all of 802.11n and AC?
MSC0-7 is everything. I am not clear how do just support the protocol that I want. Looking at that chart, I have the same question. So is the answer that I cannot support just 802.11n and AC. I have to support more than this?
ap7532-15E560(config-device-84-24-8D-15-E5-60-if-radio1)#data-rates
a-only an b-only bg bgn custom default g-only
gn mcs
ap7532-15E560(config-device-84-24-8D-15-E5-60-if-radio1)#data-rates custom
1 11 12 18 2
24 36 48 5.5 54
6 9 basic-1 basic-11 basic-12
basic-18 basic-2 basic-24 basic-36 basic-48
basic-5.5 basic-54 basic-6 basic-9 basic-mcs0-7
mcs-1s mcs-2s mcs-3s mcs-4s mcs0-15
mcs0-23 mcs0-31 mcs0-7 mcs16-23 mcs16-31
mcs24-31 mcs8-15 mcs8-23 mcs8-31 basic-mcs-1s
ap7532-15E560(config-device-84-24-8D-15-E5-60-if-radio1)#data-rates custom
