AP7522 POE issue

[Michael_Wright]

Please help, today i have being setting up and configuring 10 AP7522s i have got 7 all working correctly but for some reason 3 have POE issues they are constantly rebooting and do not say up. I have changed the cable, directly connected the AP tried different POE config on the switchports but nothing.

The switch is providing POE so all i get is the below:

*Oct 16 10:56:16.747: %ILPOWER-7-DETECT: Interface Fa2/0/23: Power Device detected: IEEE PD
*Oct 16 10:56:17.787: %ILPOWER-5-POWER_GRANTED: Interface Fa2/0/23: Power granted
*Oct 16 10:56:22.435: %LINK-3-UPDOWN: Interface FastEthernet2/0/23, changed state to up
*Oct 16 10:56:24.463: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2/0/23, changed state to up
*Oct 16 10:56:40.723: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2/0/23, changed state to down
*Oct 16 10:56:45.744: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2/0/23, changed state to up
*Oct 16 10:57:01.191: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2/0/23, changed state to down
*Oct 16 10:57:05.926: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2/0/23, changed state to up
*Oct 16 10:58:03.314: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2/0/23, changed state to down
*Oct 16 10:58:04.328: %LINK-3-UPDOWN: Interface FastEthernet2/0/23, changed state to down
*Oct 16 10:58:03.390: %ILPOWER-7-DETECT: Interface Fa2/0/23: Power Device detected: IEEE PD
*Oct 16 10:58:04.396: %ILPOWER-5-POWER_GRANTED: Interface Fa2/0/23: Power granted
*Oct 16 10:58:09.030: %LINK-3-UPDOWN: Interface FastEthernet2/0/23, changed state to up

it just repeats over and over

Please help thanks

[Michael_Wright]

Tried both commands but I cannot connect to the aps to see their status as they don't power up long enough before they reboot for example

Show adoption history on xxxxxx
Error: querying device

If I just try show adoption status or adoption history I see aps listed but they show adopted unadopted one after the other.

Any other suggestions?

Thank you for the help so far!

[Edmundo]

You can validate that the 3 APs that are restarted, finished updating the Firmware

You can see it using
! ### show adoption status

!### show adoption history

[Michael_Wright]

Yes it's an nx platform and yes it's 802.3af

[Edmundo]

Hi Michael

Do you use any NX platform to manage 7522 APs?
The PoE you're testing with is 802.3 af?