How to configure GE port of wing controller VX9000?

[Niyas]

Hi,

I have one doubt, my controller IP is 10.4.4.41/22 with VLAN 14 and my data VLAN is 18.controller is running on VMware platform with only one GE port.so how to configure ge1 port of controller?

Please find the below settings, this is correct or not

Native VLAN 14 with IP:10.4.4.41/22
Mode : Trunk
Allowed VLAN: 18,20,22,24,33,34

Thanks
Niyas P

[Yas]

Hi!
I'm not sure about that... Niyas
it's in the AP profile that the ports have to be in trunk mode
not on the controller.
The flow goes through the APs.
as the example below

profile ap7522 default-ap7522
ge1 interface
switchport mode trunk
switchport trunk native vlan 1
no switchport trunk native tagged
switchport trunk allowed vlan 1,4,14