cancel
Showing results for 
Search instead for 
Did you mean: 

how to configure wm3700 snmp trap to Zabbix?

how to configure wm3700 snmp trap to Zabbix?

Marckson_Silva
New Contributor II
How to know the number of connected points and their status via snmp?

2 REPLIES 2

Colatuno__Joe
Extreme Employee
Hey Marckson,

Are you just looking to add the APs to the snmp manager? All snmp settings can be set in the management policy. There you can add your communities if snmp v1/2 or users for snmpv3.

already configured snmp management policy in wm3700. A zabbix server has configured based on the tutorial below, but do not return total number of clients OID value: .1.3.6.1.4.1.1916.2.131.50.1.4.2.25.10.1.1.22 or number of wireless users .1.3.6.1.4.1.1916.2.131.1.1.8.1.19.0.
LINK: https://www.zabbix.com/documentation/2.0/manual/config/items/itemtypes/snmptrap

trap configuration file: /etc/snmp$ cat snmptt.conf

EVENT general .* "General event" NormalFORMAT ZBXTRAP $aA $ar
SDESC
Permite zabbix capturar traps de qualquer OID que tiver chave snmptrap General event.
EDESC
GTM-P2G8KFN