Issues with clients staying connected to an Access Point that has bad signal AP 7161 & 7562 Wing 5.8

[Tuan_Nguyen]

Hi you

My clients staying connected to an Access Point that has bad signal, i thing roaming has problem. I use 10 AP 7161 same wifi profile.

Help me please.

[Timo1]

It's a client problem. You client always decide when and why to roam.

An option to force the roaming (but can also be a disconnection) it to disable low data rates and disconnect clients with bad RSSI. But this mostly produce other problems.

[Bin]

Hi Tuan

The article which you are referencing is not related to WiNG product!

Yes, for roaming, the decision marker is the client, not AP and wireless controller.

To further troubleshooting roaming, it is better to take wireless packet capture and check site survey result.

Best regards,

[Tuan_Nguyen]

Sory misstake

https://gtacknowledge.extremenetworks.com/articles/Solution/Issues-with-clients-staying-with-an-Acce...

[Timo1]

That's not for the AP. This guide is for configuring the Intel client driver.