Need direction in setting up mesh for AP7662 APs

[Brett_Morrison]

Hi

I have 4 of the AP7662 units setup with an auto VC, but I cannot work out how to mesh these correctly. The case will be that 3 of the 4 will be root devices (LAN access) and the 4th will not have LAN access, but will need to mirror the wireless in an open dispatch yard.

I have tried following 9035201_WiNG_5_9_1_AP_SRG.pdf but I cannot find some of the options in my APs. Is there a step by step guide for setting this up?

Thanks,

Brett

[Brett_Morrison]

Thanks Darrel, at least I know now why the option is missing.

I'll review my installation plan and work around it.

thanks,

Brett

[hayman]

Please can you tell how the setup for the mesh went for you, can you share your serious with us so I can try it, thanks

[Darrel_Rhodes]

Hi Brett,

I understand that MESHConnex support won't be available on the 7662 AP platform until WiNG firmware version 5.9.2.

The release of this version is due in a month or two but unfortunately I don't have any firm release date to provide you with.

I hope this helps.

Best regards,
Darrel.

[Brett_Morrison]

Hi Ondrej

Thanks for the info - I am already on EnterpriseUI, but I have tried working through that mesh document and I have no options for meshconnex policy, so cannot create one. The only plac I can find anything on meshing is under System profile, the default profile, interface>radios, legacy mesh. This does not create a policy though.

All of my APs are 5.9.1.3-007R

Brett