RFID Tag Reading

[Saravanamurthy_]

One of Multi Speciality hospital, here using AP 7522E. Now Customer asking Support for RFID. Is this device support for RFID. If it possible how to configure. any documentation is there?. Or else Shall we go for any other third party software?

[Bin]

I do not think that we have the specific document for this topic.

But, you could check one configuration guide on 15.4.14

https://documentation.extremenetworks.com/WiNG/5.9.1/9035204_WiNG_5_9_1_WC_SRG.pdf?_ga=2.134905785.9...

Best regards,

[Ondrej_Lepa]

Hi,

Bin is correct, just pointing to wrong part of User guide.
See 8.7.5 Access Point Radio Configuration - Advanced Settings

In CLI you can do this using below commands
VX(config)#profile ap7532 default-ap7532 VX(config-profile-default-ap7532)#interface radio x VX(config-profile-default-ap7532-if-radio2)#aeroscout mac VX(config-profile-default-ap7532-if-radio2)#aeroscout forward ip 1.2.3.4 port 1234 (IP and port AeroScout server listens at) VX(config-profile-default-ap7532-if-radio2)#ekahau mac VX(config-profile-default-ap7532-if-radio2)#ekahau forward ip 1.2.3.4 port 1968 (IP and port Ekahau server listens at) However, as Alona mentioned above, this is NOT supported at EXPRESS SKU!

Please use WiNG 5.9.1.4 to collect RTLS tag's data as this release contains certain fixes.

Regards,
Ondrej

[Saravanamurthy_]

Any Configuration document is available

[Alona]

Aeroscout/Ekahu is only supported on enterprise AP - not expess.