This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

RFS 4000 does not update config of AP7562

RFS 4000 does not update config of AP7562

Go to solution
Roman_Yusupov
New Contributor

‎08-22-2019 05:27 PM

RFS 4000 does not update configuration of adopted AP7562. Version of RFS 5.9.2.0-032R, version of AP's 5.9.2.5-001R. All devices in same RF domain, autoinstall configuration is on.
0 Kudos
1 ACCEPTED SOLUTION

Go to solution
Ron_Galien
Extreme Employee

‎08-22-2019 05:46 PM

Hello Roman,
Once you have copied the AP firmware image file .img up to your RFS4000 controller you can confirm the same version of AP firmware is resident on your RFS4000 controller:

Verify by:

  1. Via CLI access on RFS4000 key in en and press (enable prompt)
  2. key in show device-upgrade versions and press
The AP model and same firmware as the RFS4000 should show here:

This should allow your AP's to complete adoption and obtain configuration from the RFS4000 controller

Hope this helps

View solution in original post

0 Kudos
5 REPLIES 5

Go to solution
Ron_Galien
Extreme Employee

‎08-22-2019 05:37 PM

Hello Roman,
In order for AP's to obtain updated information you will need to clear the firmware mix-match on AP's versus controller.

This will require that you upload a copy of AP firmware version to your RFS4000: (same version as controller)

Here is a good KCS article that covers how to copy the AP firmware to the controller:
Virtual Controller - adopted APs won't upgrade firmware
0 Kudos
GTM-P2G8KFN