cancel
Showing results for 
Search instead for 
Did you mean: 

Wing CLI question

Wing CLI question

Jacob_Airov
New Contributor III
We want to clear a bunch of overrides on a bunch of APs and their radios that was set. Is there a way to mass-clear overrides to prevent of from touching the config of each one individually?

We're using Wing 5.8 on a vx9000 controller.

Thanks for all the help lately guys!!
6 REPLIES 6

Jacob_Airov
New Contributor III
They are AP7532's that are adopted to a VX9000 controller. There is a profile applied to this particular RF Domain, but the overrides are blocking the profile (as they should).

Things were done backwards and we're trying to clean it up now, so we want the profile settings to take precedence.

aholden
Extreme Employee
Depending on your configuration and how the overrides were implemented, will change the answer

1) If you have a Controller or Virtual Controller and the changes were made in the Profile. In this case, remove the override from the Profile

2) If the APs are adopted to a Controller or Virtual Controller and the changes were made to the APs, the changes can be made on the Controllers to each adopted AP

3) If the are STANDALONE APs, the changes need to be made to each AP

GTM-P2G8KFN