Hi All
With Wing Express Manager NX5500E there is no facility using the GUI to tunnel a WLAN from an access point to the controller. I have an implementation to replace AP300 and WS5100 and the LAN infrastructure switch port setup details that the AP300 are connected is not currently available to me. The WS5100 uplink is configured as a trunk with an allowed VLAN list. The AP300 are configured for WLANs each on a different VLAN which will be tunnelled to the controller.
I would like to initially replicate this with Wing Express Manager and AP7522E during initial implementation with a view to ideally set the WLAN's to local bridge once the system in in place and working - this will be subject to how the customer has configured the switch ports of course.
By amending the NX5500E config file I can set the WLANs to tunnel but will this work and is it a supported configuration??
Thanks for any clarity on this.
