Article ID: 15065
Products
A4-Series; firmware 6.61.06.0009 through 6.61.08.0013, 6.71.01.0067 through 6.71.02.0008
Changes
Added a powered-up stack unit, with MGBICs installed and ethernet-linked in its SFP slots, to a running stack or standalone unit by interconnecting their stack cables (after issuing the 'set switch stack-port stack' command to activate the stack ports).
SFP slots are numbered 51 and 52 on a 48-port switch, 27 and 28 on a 24-port switch, and 19 and 20 on a 16-port switch.
Symptoms
The ethernet-linked MGBIC/SFP ports of the newly inserted member unit lose link.
Link loss is indicated via the port status LED (off), the CLI ("Oper Status Down" in a 'show port status'), and the lack of function (no longer passing traffic).
Solution/Workaround
Upgrade to 6.61 firmware 6.61.09.0012 or higher.
Or, optionally upgrade to firmware 6.71.03.0025 or higher.
Pre-upgrade workaround:
To resolve occurrence: Power-cycle the newly stacked member unit.
To prevent occurrence: Form the stack before ethernet-linking the new member's MGBIC port(s). Though stacking a new unit while powered up will not harm it, standard procedure (
7086) calls for the new unit to be powered down while connecting its stack cables.
